Industrial Ethernet Switch - Industrial Networking Solution
Home > Products > Korenix > JetNet - Industrial Ethernet Switch > Industrial Ethernet Switch – JetNet 2005

Industrial Ethernet Switch – JetNet 2005

industrial-ethernet-switch-jetnet2005

 

Korenix JetNet 2005 is an Industrial 5-port 10/100Base-TX Ethernet switch. JetNet 2005 adopts slim industrial design to save rail space for compact systems. In order to survive under harsh environment, JetNet 2005 features an industrial-grade aluminum case with IP31 grade protection ability against dust and water. JetNet 2005 provides one relay output for port link down events, which is enabled/ disabled by the DIP switch. Moreover, JetNet 2005 has good immunity against unstable power source and can accept DC 18~32V power input by terminal block.

  • 5 10/100TX Ports with Auto MDI/MDI-X
  • Slim-sized for Industrial Din-rail Application
  • 18~32VDC Power Input
  • Relay Output for Port Alarm
  • Supports AC 1.5KV Hi-pot isolation protection
  • IP31 rugged aluminum case
  • Operating temperature -25~70°C (-40~75°C wide temperature model available by request)

industrial-ethernet-switch-JetNet2005_dimension

Technology
Standard
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3x flow control
Switch Technology
Store and forward technology and with 3.2Gbps switch bandwidth
Aggregate System Throughput
1.49Mpps
Interface
Number of Ports
5 x 10/100 Base-TX with Auto MDI/MDI-X function
Connectors
10/100 Base-TX: RJ-45
Power / Relay: 4-pin terminal block
Cables
Cat.3, Cat.4, Cat.5 unshielded twisted pair or shielded twisted pair cable. The Link distance is maximum 100 meters
Port Alarm DIP Switch
DIP 1~5: Port Event Alarm Control
On: Enable port link down alarm
Off: Disable port link down alarm
Diagnostic LED
System: Power (green), Fault (red on)
RJ-45 port: 100Mbps Link (green on)/Activity(green blinking)
10Mbps Link (yellow on)/Activity(yellow blinking)
Power Requirements
System Power
DC 18~32V with reverse polarity protection
Power Consumption
3 Watts @ DC 24V
Mechanical
Installation
DIN-Rail mount
Casing
Aluminum case with IP31 protection
Dimensions
111.8mm(H) x 30mm (W) x 98.2mm (D) (with DIN rail clip)
111.8mm(H) x 30mm (W) x 89.4mm (D) (without DIN rail clip)
Weight
372g with package
290g without package
Environmental
Operating Temperature
-25 to 70°C (JetNet 2005)
-40 to 75°C (JetNet 2005-w)
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 85°C
Hi-Pot
1.5KV for all ports and power
Regulatory Approvals
EMI
FCC Class A, CE/EN55022
EMC Immunity Interface
EMS: IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4,
IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8
Safety
UL 508
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
MTBF
818,646 Hours, MIL-HDBK-217F GB standard

Related Product

JetPort-5801_94x180
JetPort-5601_gif_148_154
JetNet5728G-24P_appearance
industrial ethernet switch jetnet3018g
ethernet switch jetnet3008
Industrial ethernet switch JetNet3008G
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.