Technology |
|
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.1p Class of Service
IEEE802.1Q Quality of Service
IEEE802.3x Flow Control |
|
Interface |
|
8 x 10/100/1000 Base-T(X) with F/H Duplex, Auto MDI/MDI-X, Auto-Negotiation function |
|
|
10/100/1000 Base-T(X): RJ-45 |
|
|
6-pin removable terminal block
Alarm relay included in 6-pin removable terminal block:
Terminal block connector with 1A @DC24V carry ability |
|
|
Cat.3, Cat.4, Cat.5 or Cat.5e unshielded twisted pair or shielded twisted pair cable. The Link distance is 100 meters in maximum |
|
|
Power (Green) x2
Port: Link (Green on) / Activity (Green blink)
Port: 1000Mbps (Yellow on) / 100 or 10Mbps (Yellow off)
Alarm: Port /Power Event (Red on) |
|
Performance |
Aggregate System Throughput |
|
|
|
|
|
|
|
14,880pps for Ethernet 10Base-T
148,800pps for Fast Ethernet
1488,100pps for Gigabit Ethernet
Packet size from 64~1518 Bytes |
|
|
9,720 Bytes (gigabit only) |
|
|
Default enabled.
Traffic threshold: 128Mbps@1000Mbps; 12.8Mbps@100Mbps; 1.28Mbps@10Mbps |
|
|
Default Enabled. Compliance with IEEE802.1p class of service with Tag Based Priority. Each port support 4 priority queues with 8(Higher):4(High):2(Lo w):1(Lowest) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2) |
|
|
Enabled by 9-pin Dip switch.
Provides port (SW1-8) and power (SW9) event alarm |
|
Power Requirements |
|
2 Power inputs with redundancy and polarity reverse protection |
|
|
|
|
|
|
|
Mechanical |
|
|
|
IP31 grade aluminum metal case |
|
|
120mm (H) x 55mm (W) x 108mm (D) (without DIN rail clip) |
|
|
0.775kg with package
0.525kg without package |
|
Environmental |
|
|
|
0% ~ 95%, (non-condensing) |
|
|
|
|
0% ~ 95%, (non-condensing) |
|
Regulatory Approvals |
|
FCC class A, CE/EN55022 class A |
|
|
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8 |
|
|
|
|
|
|
|