Industrial Ethernet Switch - Industrial Networking Solution

Industrial Ethernet Switch – JetNet 3010G

ethernet-switch-jetnet3010g

 

The Korenix JetNet 3010G is an Unmanaged Ethernet Industrial Switch, which is equipped 7 ports RJ-45 10/100Mbps and 3 ports Gigabit TX with SFP combo. The SFP ports are compatible with accept all of SFP types Gigabit SFP Transceiver, which could be Gigabit SX, LX, LHX, ZX and XD for several of connections and distances.

  • 7 10/100 TX ports and 3 Gigabit RJ-45/SFP combo ports
  • 32Gbps Switch Fabric with excellent data exchangeper formance
  • Support 1.2KV Hi-Pot isolation protection
  • Redundant power input DC 12~48V
  • Auto Gigabit RJ-45/SFP module detection
  • IEEE 802.1p for Quality of Service (QoS)
  • Aluminum case with IP-31 grade protection
  • -20~70°C operating temperature for hazardous environment application

Industrial Ethernet Switch JetNet-3010G_dimension

Technology
Standard
IEEE802.3 10Base-T
IEEE802.3u 100Base-TX
IEEE802.3ab 1000Base-T
IEEE802.3z Gigabit Ethernet Fiber
IEEE802.3x flow control and back pressure
IEEE802.1p Class of Service
Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput
14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
Transfer packet size
64 bytes to 1522 bytes (with VLAN Tag)
MAC Address
8K MAC address table
System Packet Buffer
1Mbits shared packet buffer
Quality of Service
Compliance with IEEE802.1p class of service with Tag Based Priority rule Per switch port provides 4 priority queues with 8 (Higher):4(High):2(Low):1(Lower) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2)
Interface
Configuration
7 x 10/100 Base-TX with Auto MDI/MDI-X function Auto-Negotiation
3 x 1000Base-T supports Auto MDI/MDI-X , Auto-Negotiation function and combo with Small Form Factor Package (SFP) socket
Connectors
10/100 Base-TX: RJ-45
1000Base-T: RJ-45
SFP: supports all 3.3v SFP type Gigabit fiber transceiver
Power: 4-Pin Removable Terminal Block connector
Cables
RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters
Diagnostic LED
System Power: Power 1 (Green), Power 2 (Green)
10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/ Collision (Yellow)
port: Link/Activity(Green)
1000Base-T RJ-45 port: Link/Activity (Green)
SFP port: Link/Activity (Green)
Power Requirements
Power Supply
4 pins terminal block for power input.
DC 24V (12~48V) with polarity reverse protection and redundant function
Power Consumption
11.5 Watts @ DC 24V(Maximum)
Mechanical
Installation
DIN-Rail mount or Wall Mount
Casing
Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof
Dimensions
137.85mm(H) x 96mm (W) x 132mm (D)( with DIN rail clip)
Dimensions
0.875g without package
Environmental
Operating Temperature
-20 to 70°C
Operating Humidity
0% to 95% (Non-condensing)
Storage Temperature
-40 to 85°C
Storage Humidity
0%~ 95%, (non-condensing)
Hi-Pot
1.2KV on port to port and port to power
Regulatory Approvals
EMI
FCC Class A, CE/EN55022
EMS
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
267380 hours @ 25°C

Related Product

industrial ethernet switch JetNet_5628G_
ethernet-switch-JetNet6059G
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.