Industrial Ethernet Switch - Industrial Networking Solution

Industrial Ethernet Switch – JetNet 4006

ethernet switch-JetNet-4006

 

Korenix JetNet 4006 series is an Industrial Managed fast Ethernet Ring switch equipped with 4 10/100 Mbps ports plus 2 10/100 Mbps uplink ports for forming redundant connection in industrial Ethernet applications. The LLDP design allows the switches to be managed and configured easily by a single administrator console, where the topology can be automatically drawn in just seconds. The JetNet 4006 series combines more advanced Layer2 management protocols, such as the DHCP option 82, VLAN, IGMP snooping or SNMPv3 for efficiently controlling and managing the network performance in industrial environments.

To provide network redundancy with guaranteed secure and reliable data transmission, JetNet 4006 ser ies supports Korenix patented fast network ring recovery technology – the Multiple Super Ring (R.S.R.) which can recover network failures in just 5 milliseconds. The RSR co-exists with the IEEE 802.1d RSTP:2004 standard to deliver non-stop transmission by Rapid Dual Homing (R.D.H.) technology.

Industrial Ethernet Switch JetNet 4006 is designed with a slim IP31 rugged aluminum alloy injection case with great heat radiation ability to work reliably under high temperature environment. To provide more reliability for industrial applications, it supports wide range power input DC 12~48V with auto polarity reverse function.

  • 4 10/100 Base TX ports plus 2 10/100 Base- TX uplink ports
  • Patented Multiple Super Ring – Network Recovery time < 5 ms
  • Patented Rapid Dual Homing – compatible with RSTP
  • Supports LLDP and JetViewPro i2NMS software for auto-topology
    visualization and efficient group management
  • Supports SNMP, Web, Telnet and JetView Pro for remote management
  • Port-Based VLAN with Tag Modification for efficient traffic transmission
  • DHCP Client/Server/ DHCP Relay (Option 82) for automatic IP
    configuration
  • IEEE 802.1p QoS with CoS, DSCP scheme for high-priority data traffic
  • IGMP Snooping with Query Mode for optimized multicast forwarding
  • DC 12~48V Redundant power input with polarity reverse protection
  • Operating temperature -25~70°C

ethernet-switch-JetNet-4006_dimensions

Technology
Standard
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.1p Class of Service
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1AB Link Layer Discovery Protocol
Performance
Switch Technology
Store and Forward Technology with 3.2Gbps wire-speed non-blocking Switch Fabric
System Throughput
1.785Mpps
MAC Address
2000
Packet Buffer
Embedded 1Mbits shared buffer
Transfer performance
14,880pps for Ethernet and 148,800 for Fast Ethernet and transfer packet size from 64 to 1522Bytes
Management
Management interface
SNMP v1, v2c and v3, Web browser, JetView, JetViewPro and Console Management
SNMP MIB
RFC 1213 MIBII, RFC 1493 Bridge MIB, RFC 1757 RMON MIB, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC1215 Trap MIB, Korenix Private MIB
SNMP Trap
The SNMP trap agent provides Cold start, Warm start, Port event, Power event, Authentication failure
System Log
1000 system entries for system or remote log server
Class of Service
IEEE 802.1p class of service, with 4 priority queues per port
Quality of Service
Quality of Service determined by port, Tag and IPv4 Type of Service
DHCP
DHCP Client, DHCP Server and DHCP Relay (DHCP option 82) The DHCP-Server functions supports specified IP exclude and MAC binding function.
Timer
Supports Network Time Protocol (NTP) to synchronize time from NTP Server
VLAN
Port Based VLAN with Tag modification
IGMP
The IGMP supports IGMP v1, V2C protocol with IGMP Snooping and Query functions
Network Redundancy
Supports Rapid Super Ring function for network redundancy with 5ms network recovery time; To inter-operate with other higher-level switches, it provides Rapid Dual Homing (R.D.H.) technology compliant with RSTP protocol. JetNet 4006 is also compliant with IEEE802.1d 2004 edition for RSTP and STP.
IEEE 802.1AB LLDP
Supports Link Layer Discovery Protocol for device discovery and building infrastructure map
Event Alarm Relay
1 Dry Relay Contact output for port link down and System power events
Supports 1A @24V current ability.
Firmware upgrade
TFTP and HTTP firware upgrade
Syslog
Message logged with server and client mode
Interface
Number of Ports
6 x 10/100Base-TX
Connectors
10/100TX: RJ-45
RS-232 Console: RJ-45
6-pin Terminal Block: Power 1 and 2, Dry Relay Alarm Output
Cable
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat.5, Cat.5E/Cat.6 cable, EIA /TIA-568B 100-ohm(100m)
Reset Button
For system reboot and factory default setting
Diagnostic LED
Power LED: Power 1/Power 2 (Green)
Fast Ethernet Port 1~6: Link (Green) /Activity (Green blinking).
Alarm (Red): Port link down or power failure occurred – software configuration
Power Requirements
System Power
Redundant Power input with polarity reverse function
Power Input: DC 12~48V
Power Consumption
8 Watts @ 48V (Maximum)
Mechanical
Installation
DIN-Rail or wall mount
Case
IP-31 grade aluminum metal case
Dimensions
45.5 mm (H) x 185.3 mm (W) x 136 mm (D) without DIN
Weight
0.62 kg with package
0.55 kg without package
Environmental
Operating Temperature
-25~70°C
Operating Humidity
5% ~ 95% (Non-condensing)
Storage Temperature
-40 ~ 80°C
Storage Humidity
5% ~ 90% (Non-condensing)
Regulatory Approvals
EMI
CE/EN55022. Class A, FCC Class A
EMS
IEC 61000-4-2, IEC 61000-4-3,
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Free Fall
IEC 60068-2-32

Related Product

ethernet-switch-jetnet4510
ethernet_switch_JetNet4518_dimension_599x420
industrial ethernet switch JetNet-4508fv2
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.