| Technology |
|
|
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.1p Class of Service
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1AB Link Layer Discovery Protocol |
|
| Performance |
|
|
| Store and Forward Technology with 3.2Gbps wire-speed non-blocking Switch Fabric |
|
|
|
|
|
|
|
|
|
| Embedded 1Mbits shared buffer |
|
|
|
| 14,880pps for Ethernet and 148,800 for Fast Ethernet and transfer packet size from 64 to 1522Bytes |
|
| Management |
|
|
| SNMP v1, v2c and v3, Web browser, JetView, JetViewPro and Console Management |
|
|
|
| RFC 1213 MIBII, RFC 1493 Bridge MIB, RFC 1757 RMON MIB, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC1215 Trap MIB, Korenix Private MIB |
|
|
|
| The SNMP trap agent provides Cold start, Warm start, Port event, Power event, Authentication failure |
|
|
|
| 1000 system entries for system or remote log server |
|
|
|
| IEEE 802.1p class of service, with 4 priority queues per port |
|
|
|
| Quality of Service determined by port, Tag and IPv4 Type of Service |
|
|
|
| DHCP Client, DHCP Server and DHCP Relay (DHCP option 82) The DHCP-Server functions supports specified IP exclude and MAC binding function. |
|
|
|
| Supports Network Time Protocol (NTP) to synchronize time from NTP Server |
|
|
|
| Port Based VLAN with tag modification |
|
|
|
| The IGMP supports IGMP v1, V2C protocol with IGMP Snooping and Query functions |
|
|
|
| Supports Rapid Super Ring function for network redundancy with 5ms network recovery time; To inter-operate with other higher-level switches, it provides Rapid Dual Homing (R.D.H.) technology compliant with RSTP protocol. JetNet 4006 is also compliant with IEEE802.1d 2004 edition for RSTP and STP |
|
|
|
| Supports Link Layer Discovery Protocol for device discovery and building infrastructure map |
|
|
|
1 Dry Relay Contact output for port link down and System power events
Supports 1A @24V current ability. |
|
|
|
| TFTP and HTTP firware upgrade |
|
|
|
| Message logged with server and client mode |
|
| Interface |
|
|
4 x 10/100Base-TX
2 x 10/100Base-FX |
|
|
|
10/100TX: RJ-45
100Mbps Fiber: SC
RS-232 Console: RJ-45
6-pin Terminal Block: Power 1 and 2, Dry Relay Alarm Output |
|
|
|
JetNet 4006f-m, Multi-mode: 2KM max. distance
Wave-length: 1310 nm
Min Tx Power:-19 dBm
Max Tx Power:-14 dBm
Min Rx Sensitivity:-30 dBm
Link budget:11 dBm
JetNet 4006f-s, Single-mode: 30KM max. distance
Wave-length:1310 nm
Max Tx Power:-8 dBm
Min Tx Power:-15 dBm
Min Rx Sensitivity:-34 dBm
Link budget:19 dBm |
|
|
|
10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat.5, Cat.5E/Cat.6 cable, EIA /TIA-568B 100-ohm(100m)
100Base-FX: Multi-mode 50~62.5/125um; Single-mode 8~10/125um |
|
|
|
| For system reboot and factory default setting |
|
|
|
Power LED: Power 1/Power 2 (Green)
Fast Ethernet Port 1~6: Link (Green) /Activity (Green blinking).
Alarm (Red): Port link down or power failure occurred – software configuration |
|
| Power Requirements |
|
|
Redundant Power input with polarity reverse function
Power Input: DC 12~48V |
|
|
|
|
| Mechanical |
|
|
|
|
|
| IP-31 grade aluminum metal case |
|
|
|
| 45.5 mm (H) x 185.3 mm (W) x 136 mm (D) without DIN |
|
|
|
0.62 kg with package
0.55 kg without package |
|
| Environmental |
|
|
| -10~60°C (JetNet 4006f), -40~60°C (JetNet 4006f-w) |
|
|
|
| 5% ~ 95% (Non-condensing) |
|
|
|
|
|
|
| 5% ~ 90% (Non-condensing) |
|
| Regulatory Approvals |
|
|
| CE/EN55022. Class A, FCC Class A |
|
|
|
IEC 61000-4-2, IEC 61000-4-3,
IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6 |
|
|
|
|
|
|
|
|
|
|
