Industrial Ethernet Switch - Industrial Networking Solution

Industrial Ethernet Switch – JetNet 6059G

ethernet-switch-JetNet6059G

 

JetNet 6059G series is an Industrial Gigabit Managed Ethernet Switch with 9 full gigabit ports and 32G switching backplane to ensure high quality data transmission in industrial applications requiring high-bandwidth connectivity. In addition to 4 Giga RJ-45 ports, the switch is equipped with 5 Giga RJ-45/SFP combo ports to deliver maximum throughput and flexibility for high-density connection while providing Giga uplink or Giga Ring connection. With the Korenix patented MSR technology, users can aggregate up to 4 MultiGigaRings into a single switch and ensure network reliability in applications with increased bandwidth and expended system. Furthermore, JetNet 6059G supports advanced management and security features, such as LLDP and JetViewPro, 4 QoS, 256 VLAN, IGMP Snooping, DHCP, LACP to ensure high performance network communication. The supported Modbus TCP/IP protocol makes the switches suitable for factory automation systems while offering enhanced connectivity and easier network maintenance. JetNet 6059G provides dual redundant 10.5~60VDC power inputs and -40~75oC wide operating temperature range to work reliably under vibrating and shock environments in maritime, railway or rolling stock applications.

  • 4 Gigabit copper ports, 5 Gigabit copper/SFP combo ports to extend Giga Copper/Fiber uplink or redundant Ring connection
  • SFP ports support 100/1000 Fiber with Digital Diagnostic Monitoring (DDM) to monitor long distance fiber quality
  • Independent SFP Link speed indication
  • 32Gbps switch Fabric, 8K MAC address to ensure High Quality Data transmission
  • Isolated RS-232 Console port for negative power system
  • Korenix MSR pattern aggregates up to 4 x 1000M Rings for critical data stream redundancy
  • Supports LLDP and optional JetView Pro i2NMS software for network auto-topology visualization and efficient group management
  • Supports Modbus TCP/IP for Factory Automation
  • Advanced management by LACP/256 VLANs/GVRP/QoS/IGMP Snooping/ Rate Control/ Online Multi-Port Mirroring/DHCP option 82
  • Advanced Security system by Port Security, Access IP list, SSH and HTTPS Login
  • Event Notification through E-mail, SNMP trap and SysLog
  • Cisco-Like CLI, Web, SNMP, RMON for network Management
  • Dual redundant 10.5~60VDC power inputs for system reliability
  • Hi-pot isolation and -25~70oC (JetNet 6059G), -40~75oC (JetNet 6059G-w) operating temperature for harsh environments

JetNet6059G_dimension

Technology
Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE 802.3ad Link Aggregation Protocol (LACP)
IEEE 802.1x Port Based Network Access Protocol
IEEE 1588 Precision Time Protocol (PTP)
Modbus TCP/IP
Performance
Switch Technology
Store and Forward Technology with 32Gbps Switch Fabric.
System Throughput
26 Mega packets per second, 64 bytes packet size.
14,880pps for 10Base-T
148,800pps for 100Base-TX/FX
1488,100pps for 1000Base-T/ Gigabit fiber
Maximum packet size up to 1632bytes
CPU Performance
32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer
System Memory
8M bytes flash ROM, 64M bytes SDRAM
Transfer packet size
64 bytes to 1632 bytes (includes 1522 bytes VLAN Tag)
MAC Address
8K
Packet Buffer
1M bits shared memory for packet buffer
Transfer performance
14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet
Thermal Monitoring
Embedded board-level thermal detector for main-chip temperature monitoring
Relay Alarm
Dry Relay output with 1A /30V DC or 0.5A/125V AC ability
Digital Input (DI)
One Digital Input with Photo Copular isolation
Digital High: DC 11V~30V
Digital Low: DC 10V~0V
System Management
Configuration and monitoring interface
Supports 4 configuration and monitoring interfaces: RS-232 serial port, Telnet, SNMP and Web Browser interface
The RS-232 and Telnet interfaces support Cisco like instructions.
System upgrade/Backup
Provides TFTP/Web interface for firmware upgrade and configuration backup, restore
Telnet & Local Console
Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH
SNMP
Supports v1, v2c, V3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address
SNMP MIB
MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB
Korenix Utility
Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
Network Time Protocol
Supports NTP protocol with daylight saving function and localize time sync function
Management IP Security
IP address security to prevent unauthorized access
E-mail Warning
4 receipt E-mail accounts with mail server authentication
System Log
Supports both Local or remote Server with authentication
Modbus TCP/IP
Supports open protocol – Modbus TCP/IP with function code group -4 for factory automation application.
Network Performance
IEEE802.3x
Flow control pause frame supports on 10/100/1000Mbps Full Duplex and Back-pressure supports on 1000Mbps Half Duplex only
Port Configuration
Port link Speed, Link mode, current status and enable/disable
Port Trunk
IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 4 trunk groups include Gigabit Ethernet port
VLAN
IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries 3 VLAN link modes- Trunk, Hybrid and Link access
Private VLAN
Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN
IEEE 802.1 QinQ
Supports Double VLAN Tag function for implementing Metro Network topologies
Class of Service
IEEE 802.1p class of service; per port 4 priority queues
Traffic Prioratization
Supports 4 physical queues, weighted run robin queuing (WRR 8:4:2:1) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network
IGMP Snooping
IGMP Snooping v1/v2 /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port
Rate Control
Ingress filtering for Broadcast, Multicast, Unknown DA or all packets. Egress filtering for all packet types
Port Mirroring
Online traffic monitoring on multiple selected ports
Port Security
Port security to assign authorized MAC to specific port
DHCP
DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82)
IEEE 802.1x with Radius control
Port based network access control and also supports user authenticate by the radius account, password and key for the radius server authentication
Network Redundancy
Multiple Super Ring (MSR)
New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRingTM, MultiRingTM and backward compatible with legacy Super RingTM; up to 20ms recovery time on fiber port
Rapid Dual Homing (RDH)
Multiple uplink paths to one or multiple upper switch
Trunk Ring
Integrate port aggregate function in ring path to get higher throughput ring architecture
MultiRing
Couple or multiple up to 16 Rapid Super Rings, JetNet 6059G supports up to 4 Gigabit Ring in one Switch
Rapid Spanning Tree
IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w
Multiple Spanning Tree
IEEE802.1s MSTP, each MSTP instance can include one or more VLANs
Interface
Enclosure Port
10/100/1000TX: 9 x RJ-45
Fast Ethernet/ Gigabit Fiber: 5 x SFP socket
RS-232 interface: RJ-45 connector
Alarm Relay, Digital Input: 4 pin removable terminal block
Power connector: 4-pin removable terminal block
Cables
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm (100m)
100 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5e,  6 cable, EIA/TIA-568B 100-ohm (100m)
RS232 Serial Interface
Isolated serial interface
LED Indicators
10/100/1000 RJ-45 port: Link (Green on) / Activity (Blinking), 1000Mbps (Yellow on)
SFP port: Link (Green on)/Activity (Blinking), 1000Mbps (Yellow on)
System Power: Power on (Green on)
Alarm Relay Output: Relay Activate (Red on)
Digital Input: Signal input ( Green on)/ No signal (Green off)
System Status: System ready (Green on) / Indication (Green Blinking)
Ring Status: Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring abnormal) / Blinking (device’s ring port failed)
Power Requirements
System Power
2 power inputs with redundancy and polarity reverse protection; supports positive /negative power system.
Input voltage
Typical 24VDC, DC 10.5~60V range
Power Consumption
24Watts / DC 24V
Mechanical
Installation
DIN-Rail and Panel Mounting
Casing
Aluminum metal case with IP31 grade protection
Dimension
95 x 160 x 136 (W x H x D) / with DIN Rail Clip
95 x 160 x 127.2 (W x H xD) / without DIN Rail Clip
Weight
1440g without package
Environmental
Operating Temperature
-25~70°C (JetNet 6059G)
-40~75°C (JetNet 6059G-w)
Operating Humidity
0% ~ 95% non-condensing
Storage Temperature
-40~85°C
Hi-Pot Insulation
AC 1.5KV for all ports and power
Regulatory Approvals
EMC
Compliance with the EMC standard of Heavy Industrial IEC/EN 61000-6-2, IEC/EN 61000-6-4 and FCC part 15 Subpart B
EMS
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8
Vibration
IEC 60068-2-6Note-1
Shock
IEC 60068-2-27Note-2
Free Fall
IEC60068-2-32 with packageNote-3

 

Related Product

ethernet switch - JetNet-5428G
ethernet-switch-jetnet4510
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.