Unmanaged Ethernet Switch - Industrial Networking Solution

Unmanaged Industrial Ethernet Switch – SDI-550

Unmanaged Industrial Ethernet Switch_SDI-550

Unmanaged Industrial Ethernet Switch_SDI-550

The SDI-550 is a simple and cost effective unmanaged industrial ethernet switch suitable for use in a wide range of factory and building automation applications. A high speed switch core ensures full speed on all ports and transparency to any Ethernet protocol.

The unit is designed for DIN rail mounting into industrial cabinets allowing simple Ethernet connections to be established between PLCs, I/O units, drives, inverters and HMIs. The voltage input of around 24 VDC or AC makes the unit ideal in these types of application and the fault relay can be connected to an I/O unit to provide simple network management.

Designed to work in industrial environments with its IP 31 Aluminium housing and a wide temperature specification the Industrial Ethernet Switch SDI-550 is an ideal automation solution.

The Unmanaged Industrial Ethernet Switch SDI-550 is so easy to use, simply connect power to the screw terminals and plug in your RJ-45 cables. If you plan to use the fault contacts a DIP switch allows configuration whilst LEDs provide simple diagnostics if required.

back to industrial ethernet switch

5-port 10/100 TX Compact Fast Ethernet switch
3.2 Gbit/s Switch Fabric with excellent data exchange performance
Variable power input, AC 18 – 27 V / DC 18 – 32 V
Fault relay alarm
Aluminum case with IP-31 grade protection
–25 ~ 70ºC operating temperature

• Technology

 IEEE802.3 10Base-T

 IEEE802.3u 100Base-TX

 IEEE802.3x flow control

 Switch Technology  Store and forward technology and with 3.2 Gbit/s switch fabric
• Interface
 Number of Ports  5 x 10/100 Base-TX with Auto MDI/MDI-X, Auto-Negotiation function
 Connectors  10/100 Base-TX: RJ-45 Power/Relay: 4-pin terminal block
 Cables  CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The Link distance is 100 meters in maximum
 Diagnostic LED  System: Power (green), Fault (red on)

 RJ-45 port: 100 Mbit/s Link (green on) / Activity(green blinking)

 10 Mbit/s Link (yellow on) / Activity (yellow blinking)

 Port Alarm DIP Switch
• Power Requirements
 System Power  2 pins terminal block for power input.DC 18 ~ 32 V with reverse polarity protection.AC 18 ~ 27 V, 47 ~ 63 Hz
 Consumption  3.5 Watts @ DC 24 V
• Mechanical
 Installation  DIN-Rail mount
 Case  Aluminum case with IP-31 protection

 111.8 mm (H) x 30 mm (W) x 98.2 mm (D) (with DIN rail clip)

 111.8 mm (H) x 30 mm (W) x 89 mm (D) (without DIN rail clip)

 Weight  372 g with package 290 g without package
• Environmental
 Operating Temperature  –20 ~ 70ºC
 Operating Humidity  0% ~ 95%, (non-condensing)
 Storage Temperature  –40 ~ 85ºC
 Hi-Pot  1.5 KV for all ports and power
• Regulatory Approvals
 EMI  FCC Class A, CE/EN55022
 EMS  EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
 Safety  CE/EN60950
 Shock  IEC60068-2-27
 Vibration  IEC60068-2-6
 Free Fall  IEC60068-2-32

Related Product

unmanged industrial ethernet switch SDI-541
serial-pstn-router ED-210
industrial serial converter / repeater 480px_RD-48
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.