Unmanaged Industrial Ethernet Switch – SDI-880
The SDI-880 is a simple and cost effective industrial unmanaged Industrial ethernet switch suitable for use in a wide range of factory and building automation applications. A high speed switch core ensures full speed on all ports and transparency to any Ethernet protocol.
The unit is designed for DIN rail mounting into industrial cabinets allowing simple Ethernet connections to be established between PLCs, I/O units, drives, inverters and HMIs. The dual power input makes the unit ideal in these types of application and the fault relay can be connected to an I/O unit to provide simple network management.
Designed to work in industrial environments with its IP 31 Aluminium housing and a wide temperature specification the westermo Industrial Ethernet Switch SDI-880 is an ideal automation solution.
The Unmanaged Industrial Ethernet Switch SDI-880 is so easy to use, simply connect power to the screw terminals and plug in your RJ-45 cables. If you plan to use the fault contacts a DIP switch allows configuration whilst LEDs provide simple diagnostics if required. A broadcast storm filter even helps out if a loop is created by mistake.
back to industrial ethernet switch
8 10/100TX Ports with Auto MDI/MDI-X
Compact size with full power redundancy
2 Gbit/s Switch Fabric
QoS for packet forwarding prioritisation
Broadcast storm packet filtering.
Port and power event alarm
IP-31 aluminum alloy case
DIN-Rail mount
Dual power input DC 10 ~ 48 V
AC 1.5 KV Hi-pot isolation protection
–34 ~ 70ºC operating temperature for hazardous environment application
• Technology | |
Standard |
IEEE802.3 10Base-T |
Switch Technology | Store and forward technology and with 2 Gbit/s switch fabric |
• System Performance | |
Aggregate System Throughput | 1.49 Mpps |
MAC Address | 2K MAC |
Packet Buffer | 448 Kbits |
Transfer Packet Size | 14.880 pps for Ethernet 10Base-T 148.800 pps for Fast Ethernet Packet size from 64~1552 Bytes ( Long Packet forwarding ability) |
Broadcast storm control | Default enabled Traffic threshold: 200 packets / Sec. @ 100 Mbit/s; 20 packets / Sec. @ 10 Mbit/s |
Class of Service | Provides 2 packet forwarding Queues: High Queue (4 ~ 7), Low Queue (0 ~ 3) |
Quality of Service | Default Enabled. Supports VLAN tag priority and IPv4 packet precedence |
Event alarm relay | Provides port and power event alarm; Enabled by 9-PIN Dip-switch |
• Interface | |
Number of Ports | 8 x 10/100 Base-TX with Auto MDI/MDI-X, Auto-Negotiation function |
Connectors | 10/100 Base-TX: RJ-45 |
Cables |
CAT-3, CAT-4, CAT-5, CAT-5e unshielded twisted pair or shielded twisted pair cable. The Link distance is 100 meters in maximum. |
Power | Terminal Block |
Diagnostic LED |
Power (Green) x2 |
Alarm Relay | Terminal block connector with 1 A @ DC 24 V carry ability |
• Power Requirements | |
System Power |
2 Power inputs with redundancy and polarity reverse protection. |
Consumption | 4 Watts @ DC 24 V |
• Mechanical | |
Installation | DIN-Rail mount |
Case | IP-31 grade aluminum metal case |
Dimension | 120 mm (H) x 55 mm (W) x 108 mm (D) ( without DIN rail clip) |
Weight |
0.775 kg with package |
• Environmental | |
Operating Temperature | –34 ~ 70ºC |
Operating Humidity | 0% ~ 95%, (non-condensing) |
Storage Temperature | –40 ~ 85ºC |
Hi-Pot | 0% ~ 95%, (non-condensing) |
• Regulatory Approvals | |
EMI | FCC Class A, CE/EN55022 |
EMS |
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Vibration | IEC60068-2-6 |
Free Fall | IEC60068-2-32 |