Unmanaged Industrial Ethernet Switch - Industrial Networking Solution
Home > Products > Westermo > Industrial Ethernet Switches > Unmanaged Industrial Ethernet Switch – SDW-550 SERIES

Unmanaged Industrial Ethernet Switch – SDW-550 SERIES

unmanaged_industrial_ethernet_switch_480px_SDW-550

Unmanaged Industrial Ethernet Switch_480px_SDW-550ex

 

The SDW-550 is an Westermo unmanaged Industrial  Ethernet Switch  5 port designed for easy use in heavy duty industrial applications. The unit supports 802.1Q long packets which allows all standard industrial Ethernet protocols switch to be used.

The Westermo Unmanaged Industrial Ethernet Switch SDW-550 is designed for use in industrial applications and so has dual power inputs for 10 to 57 VDC operation.

Total galvanic isolation between each port is reinforced by the unique isolation provided between each chassis screen helping to avoid ground loop currents. The IP 21 rating ensures that the unit can be installed in locations where condensed water may occur.

Only industrial grade components are used which gives the Westermo Ethernet Switch SDW-550 an MTBF of 675,000 hours and ensures a long service life. A wide operating temperature range of –25 to +70°C (–13 to +158°F) can be achieved with no moving parts. The Industrial Ethernet Switch SDW-550 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and shock standards, all to the highest levels suitable for heavy industrial environments.

Network diagnostics are simplified with the inclusion of port mirroring on one port allowing data flow through the switch to be monitored using a network analyzer. All five ports can have data rate and flow control locked by DIP switch which can eliminate problems with old legacy Ethernet equipment that is unable to support auto negotiation.

back to industrial ethernet switch

SDW-550

• Product Description
Status Active
Article number 3644-0001
Ports 5 x RJ-45, 10 Mbit/s or 100 Mbit/s
Description Industrial Ethernet 5-port Switch
• Approvals
Marine DNV Standard for Certification no. 2.4 4
• Reliability prediction
MTBF, operating 674,293 h
• EMC (Electromagnetic Compatibility)
EN 61000-6-2 Immunity industrial environments
EN 61000-6-3 Emission residential environments
EN 61000-6-4 Emission industrial environments
• Climatic
Temperature, operating –25 to +70°C (–13 to +158°F)
Temperature, storage –25 to +70°C (–13 to +158°F)
Humidity, operating 5 to 95 % (non-condensing)
Humidity, storage 5 to 95 % (condensation allowed outside packaging)
• Enclosure
Enclosure -
Dimensions (W x H x D) 35 x 121 x 119 mm
Weight 0.2 kg
Degree of protection IP 21
Mounting DIN Rail
• Interface specifications, power
Operating voltage 9.6 – 57.6 VDC
Rated voltage 12 –48 VDC, polarity protected
Rated current @12 VDC power input 320 mA
Rated frequency DC
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm2 (AWG 24-12)
• Interface specifications, 10/100BaseTX
Electrical specification IEEE std 802.3. 2000 edition
Data rate 10 Mbit/s or 100 Mbit/s, manual or auto
Duplex Full or half, manual or auto
Circuit type Optical
Transmission range 100 m
Connection SC, ST or LC

SDW-550 EX

• Product Description
Status Active
Article number 3644-5001
Ports 5 x RJ-45, 10 Mbit/s or 100 Mbit/s
Description Industrial Ethernet 5-port Switch
• Approvals
Marine EN 60079-0 and EN 60079-15 5
• Reliability prediction
MTBF, operating 674,293 h
• EMC (Electromagnetic Compatibility)
EN 61000-6-2 Immunity industrial environments
EN 61000-6-3 Emission residential environments
EN 61000-6-4 Emission industrial environments
• Climatic
Temperature, operating –25 to +70°C (–13 to +158°F)
Temperature, storage –25 to +70°C (–13 to +158°F)
Humidity, operating 5 to 95 % (non-condensing)
Humidity, storage 5 to 95 % (condensation allowed outside packaging)
• Enclosure
Enclosure -
Dimensions (W x H x D) 35 x 121 x 119 mm
Weight 0.2 kg
Degree of protection IP 21
Mounting DIN Rail
• Interface specifications, power
Operating voltage 9.6 – 57.6 VDC
Rated voltage 12 –48 VDC, polarity protected
Rated current @12 VDC power input 320 mA
Rated frequency DC
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm2 (AWG 24-12)
• Interface specifications, 10/100BaseTX
Electrical specification IEEE std 802.3. 2000 edition
Data rate 10 Mbit/s or 100 Mbit/s, manual or auto
Duplex Full or half, manual or auto
Circuit type Optical
Transmission range 100 m
Connection SC, ST or LC

Related Product

Managed Industrial Ethernet Switch RFI-10
industrial modem
Managed Industrial Ethernet Switch RFI-18-F4G-T4G-F8
Managed Industrial Ethernet Switch Viper-408
Industrial Serial Converter be_210px_MDW-45_EX
be_480px_MRD-330
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.