Industrial GSM Modem – GDW-11 Series
The GDW-11 is a Industrial GSM modem designed to allow connection of legacy serial equipment over a GSM/GPRS network.
The AT command driven modem operates over the GSM/GPRS networks providing speed up to 14.4 kbit/s on GSM or 85.6 kbit/s when using GPRS.
The GDW-11 is designed for use in heavy duty industrial applications. The wide power range, galvanic isolation, guarantees communication in the worst environments.
Only industrial grade components are used which gives the GDW-11 an MTBF of 1,100,000 hours and ensures a long service life. A wide operating temperature range of –25 to +70°C (–13 to +158°F) is achieved with no moving parts.
The GDW-11 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and shock standards, all to the highest levels suitable for heavy industrial environments and rail trackside applications.
The modem is simple to configure both by DIP switches as well as by the Westermo GD-tool software; standard commands can easily be entered, and saved configurations downloaded. RS-232 connections can be made using screw connections as well as the standard D-sub. The modem is designed to be connected to devices with no ability to control dialing so special functions like data dialing and DTR dialing are provided to enable these devices to automatically establish connections.
GDW-11
• Product Description | |
Status | Active |
Article number | 3615-0030 |
Ports | 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x SIM slot. |
Description | GSM modem, GSM / GPRS |
•Standard compliance |
|
R&TTE | Article 3.1b EN 301 489-1, EN 301 489-7 Article 3.2 EN 301 489-1, EN 301 419-1, EN 301 511 |
• Reliability prediction | |
Service life, operating | Operating, 10 years |
• EMC (Electromagnetic Compatibility) | |
EN 61000-6-2 | Immunity industrial environments |
EN 61000-6-3 | Emission residential environments |
EN 55024 | Immunity IT equipment |
FCC part 15 | Class B |
EN 50121-4 | Railway signalling and telecommunications apparatus |
IEC 62236-4 | Railway signalling and telecommunications apparatus |
• EMC Specification | |
EN 61000-4-2, ESD | Enclosure contact, ± 6 kV Enclosure air, ± 8 kV |
IEC 61000-4-3, RF field AM modulated | Enclosure, 20 V/m 80% AM (1 kHz), 80 – 2000 MHz |
ENV 50204, RF field 900 MHz | Enclosure, 20 V/m pulse modulated 200 Hz, 900 ± 5 MHz |
EN 61000-4-4, fast transients | Signal ports, ± 2 kV Power ports, ± 2 kV |
EN 61000-4-5, surge | Signal ports unbalanced, ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced, ± 2 kV line to earth, ± 1 kV line to line Power ports, ± 2 kV line to earth, ± 2 kV line to line |
EN 61000-4-6, conducted RF immunity | Signal ports, 10 V 80% AM (1 kHz), 0.15 – 230 MHz Power ports, 10 V 80% AM (1 kHz), 0.15 – 230 MHz |
EN 61000-4-8, power frequency magnetic field | Enclosure, 100 A/m, 50 Hz, 16.7 Hz & 0 Hz |
EN 61000-4-9, pulsed magnetic field | Enclosure, 1000 A/m, 6.4 / 16 ms 5 pos/5neg pulse in XYZ direction |
EN 61000-4-11, Voltage dips and interruption | AC power ports: 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction |
EN 61000-4-16, Mains freq. 50 Hz | Signal ports, 100 V 50 Hz line to earth |
SS 436 15 03, Mains freq. 50 Hz | Signal ports, 250 V 50 Hz line to line |
EN 61000-4-29, voltage dips and interruption | DC power ports: 10 & 100 ms, interruption 10 ms, 30% reduction 10 ms, 60% reduction +20% above & –20% below rated voltage |
EN 55022, radiated RF emission | Enclosure, Class B |
FCC part 15, radiated RF emission | Enclosure, Class B |
EN 55022, conducted emission | AC power ports, Class B DC power ports, Class B |
FCC part 15, conducted emission | AC power ports, Class B |
• Safety | |
Safety | UL/CSA/IEC/EN 60950-1, IT equipment |
EN 60950-1,dielectric strength | Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min, 2 kVrms 50 Hz 1 min (@ rated power <60 V) |
• Climatic | |
Temperature, operating | –25 to +50°C (–13 to +122°F) |
Temperature, storage | –30 to +85°C (–22 to +185°F) |
Humidity, operating | 5 to 95% relative humidity |
Humidity, storage | 5 to 95% relative humidity |
• Enclosure | |
Enclosure | UL 94, PC / ABS, Flammability class V-1 |
Dimensions (W x H x D) | 35 x 123 x 121 mm (1.33 x 4.84 x 4.76) |
Weight | 0.2 kg |
Degree of protection | IP 21 |
Cooling | Convection |
Mounting | Horizontal on 35 mm DIN-rail |
• Mechanical | |
IEC 60068-2-6, vibration | Operating 7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz |
IEC-60068-2-27, shock | Operating, 15 g, 11 ms |
• Interface specifications, power | |
Operating voltage | 10 to 60 VDC |
Rated voltage | 12 to 48 VDC |
Rated current | 350 mA @ 12 VDC 150 mA @ 24 VDC 75 mA @ 48 VDC |
Rated frequency | DC |
Inrush current | 0.05A2s |
Startup current | 0.75A peak |
Polarity | Reverse polarity protected |
Redundant power input | Yes |
Isolation to | All other ports 3 kVrms 50 Hz 1 min |
Connection | Detachable screw terminal |
Connector size | 0.2 – 2.5 mm2 (AWG 24-12) |
Shielded cable | Not required |
• Interface specifications, RS-232 | |
Electrical specification | RS-232 V.24 |
Data rate | 300 bit/s – 115.2 kbit/s |
Data format | 7 or 8 data bits, Odd, even or no parity, 1 or 2 stop bits |
Protocol | Transparent |
Retiming | Yes |
Transmission range | 15 m / 49 ft |
Conductive housing | Isolated to all other circuits |
Isolation to | Power port 3 kVrms 50 Hz 1 min |
Connection | 9-pin D-sub female (DCE) and 5 pos Detachable screw terminal (DCE) |
Shielded cable | Not required |
Connector size | Detachable screw terminal 0.2 – 2.5 mm2 (AWG 24 – 12) |
• Interface specification, Antenna |
|
Frequency bands | GSM900 TX 880 – 915 and RX 925 – 960 MHz GSM1800 TX 1710 – 1785 and RX 1805 – 1880 MHz |
Data rate | CSD: up to 14.4 kbit/s, GPRS: up to 85.6 kbit/s |
Connection | SMA female, impedance: 50 ohm |
Isolation to | Power port 3 kVrms 50 Hz 1 min |
• Interface spcification, SIM | |
Electrical specification | 3 volts SIM supported |
Isolation to | Power port 3 kVrms 50 Hz 1 min |
GDW-11 EX
• Product Description | |
Status | Active |
Article number | 3615-5030 |
Ports | 1 x 300 bit/s to 115.2 kbit/s, RS-232. 1 x SIM slot. |
Description | GSM modem, GSM / GPRS |
• Approvals | |
Hazardous locations | EN 60079-0, Explosive atmospheres – General requirements EN 60079-15, Explosive atmospheres – Construction, test and marking of type of protection “n” electrical apparatus |
•Standard compliance |
|
R&TTE | Article 3.1b EN 301 489-1, EN 301 489-7 Article 3.2 EN 301 489-1, EN 301 419-1, EN 301 511 |
• Reliability prediction | |
Service life, operating | Operating,10 years |
• EMC (Electromagnetic Compatibility) | |
EN 61000-6-2 | Immunity industrial environments |
EN 61000-6-3 | Emission residential environments |
EN 55024 | Immunity IT equipment |
FCC part 15 | Class B |
EN 50121-4 | Railway signalling and telecommunications apparatus |
IEC 62236-4 | Railway signalling and telecommunications apparatus |
• EMC Specification | |
EN 61000-4-2, ESD | Enclosure contact, ± 6 kV Enclosure air, ± 8 kV |
IEC 61000-4-3, RF field AM modulated | Enclosure, 20 V/m 80% AM (1 kHz), 80 – 2000 MHz |
ENV 50204, RF field 900 MHz | Enclosure, 20 V/m pulse modulated 200 Hz, 900 ± 5 MHz |
EN 61000-4-4, fast transients | Signal ports, ± 2 kV Power ports, ± 2 kV |
EN 61000-4-5, surge | Signal ports unbalanced, ± 2 kV line to earth, ± 2 kV line to line Signal ports balanced, ± 2 kV line to earth, ± 1 kV line to line Power ports, ± 2 kV line to earth, ± 2 kV line to line |
EN 61000-4-6, conducted RF immunity | Signal ports, 10 V 80% AM (1 kHz), 0.15 – 230 MHz Power ports, 10 V 80% AM (1 kHz), 0.15 – 230 MHz |
EN 61000-4-8, power frequency magnetic field | Enclosure, 100 A/m, 50 Hz, 16.7 Hz & 0 Hz |
EN 61000-4-9, pulsed magnetic field | Enclosure, 1000 A/m, 6.4 / 16 ms 5 pos/5neg pulse in XYZ direction |
EN 61000-4-11, Voltage dips and interruption | AC power ports: 10 & 5 000 ms, interruption 10 & 500 ms, 30% reduction 100 & 1 000 ms, 60% reduction |
EN 61000-4-16, Mains freq. 50 Hz | Signal ports, 100 V 50 Hz line to earth |
SS 436 15 03, Mains freq. 50 Hz | Signal ports, 250 V 50 Hz line to line |
EN 61000-4-29, voltage dips and interruption | DC power ports: 10 & 100 ms, interruption 10 ms, 30% reduction 10 ms, 60% reduction +20% above & –20% below rated voltage |
EN 55022, radiated RF emission | Enclosure, Class B |
FCC part 15, radiated RF emission | Enclosure, Class B |
EN 55022, conducted emission | AC power ports, Class B DC power ports, Class B |
FCC part 15, conducted emission | AC power ports, Class B |
• Safety | |
Safety | EN 60950-1, IT equipment |
EN 60950-1,dielectric strength | Signal port to other isolated ports, 2 kVrms 50 Hz 1 min Power port to other isolated ports, 3 kVrms 50 Hz 1 min, 2 kVrms 50 Hz 1 min (@ rated power <60 V) Any port to any port and enclosure, 0,5 kVrms 50 Hz 1 min |
• Climatic | |
Temperature, operating | –25 to +50°C (–13 to +122°F) |
Temperature storage | –30 to +85°C (–22 to +185°F) |
Maximum surface temperature | 135ºC (275ºF) (temperature class T4) |
Humidity, operating | 5 to 95% relative humidity |
Humidity, storage | 5 to 95% relative humidity |
• Enclosure | |
Enclosure | Cabelec 6141 |
Dimensions (W x H x D) | 34 x 123 x 121 mm (1.33 x 4.84 x 4.76) |
Weight | 0.2 kg |
Degree of protection | IP 21 |
Cooling | Convection |
Mounting | Horizontal on 35 mm DIN-rail |
• Mechanical | |
IEC 60068-2-6, vibration | Operating: 7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz |
IEC-60068-2-27, shock | Operating, 15 g, 11 ms |
• Interface specifications, power | |
Operating voltage | 10 to 60 VDC |
Rated voltage | 12 to 48 VDC |
Rated current | 350 mA @ 12 VDC 150 mA @ 24 VDC 75 mA @ 48 VDC |
Rated frequency | DC |
Inrush current | 0.05 A²s |
Startup current | 0.75 A peak |
Polarity | Reverse polarity protected |
Isolation to | All other ports 3 kVrms 50 Hz 1 min |
Connection | Detachable screw terminal |
Connector size | 0.2 – 2.5 mm2 (AWG 24-12) |
Shielded cable | Not required |
• Interface specifications, RS-232 | |
Electrical specification | RS-232 V.24 |
Data rate | 300 bit/s – 115.2 kbit/s |
Data format | 7 or 8 data bits, Odd, even or no parity, 1 or 2 stop bits |
Protocol | Transparent |
Retiming | Yes |
Transmission range | 15 m / 49 ft |
Conductive housing | Isolated to all other circuits |
Isolation to | Power port 3 kVrms 50 Hz 1 min |
Connection | 9-pin D-sub female (DCE) and 5 pos Detachable screw terminal (DCE) |
Shielded cable | Not required |
Connector size | Detachable screw terminal 0.2 – 2.5 mm2 (AWG 24 – 12) |
• Interface specification, Antenna |
|
Frequency bands | GSM900 TX 880 – 915 and RX 925 – 960 MHz GSM1800 TX 1710 – 1785 and RX 1805 – 1880 MHz |
Data rate | CSD: up to 14.4 kbit/s, GPRS: up to 85.6 kbit/s |
Connection | SMA female, impedance: 50 ohm |
Isolation to | Power port 3 kVrms 50 Hz 1 min |
•Interface specification, SIM |
|
Electrical specification | 3 volts SIM supported |
Isolation to | Power port 3 kVrms 50 Hz 1 min |