JetBox 8152 - Industrial Networking Solutions – Industrial Ethernet Switches and Routers

JetBox 8152

The JetBox 8152 is a VIA Eden V4 1GHz based computer with system memory 1GB DDRII RAM and built in media processor for multimedia performance enhancement. Volume and performance of the JetBox 8152 is utilized as a perfect front end device: compact design, DIN-rail type mouting, and carrying all major inter faces, such as two USB2.0 por ts, one RS-232/422/485 port, one CANbus port, VGA, and high resolution audio. In addition, it is equipped with two RJ-45 ports and supports web server services to accommodate to the network communication environment today.

Windows Embedded ready
The advantage of adopting Korenix JetBox series is ready-to-use. Korenix is devoted to improve the usability of embedded computer in industrial domain. Korenix integrates device drivers, protocol stacks, system utilities, supporting services for Windows XP embedded in a CompactFlash card or in a 2.5” HD installed in the JetBox 8152 to let users experience JetBox 8152 in a simple way.

CANbus supported (Optional)
The JetBox 8152 supports the CANbus control in XPe. With CANbus, the JetBox 8152 is suitable for industrial applications with many nodes, the transmission distance within 10 km and more security required.

Dimensions (Unit = mm)

  • High Performance Multimedia Processor
  • VIA Eden V4 1GHz, 128K L2 cache
  • Multimedia processor CX700M
  • DDR2 1GB (200-pin SoDIMM)
  • Max. 128MB VGA memory
  • High resolution audio
  • Sophisticated Enclosure for Demanding Operation
  • Fan-less, aluminum heat-sink frame housing to enhance heat dispersion
  • Industrial design for anti-vibration & anti-shock
  • Abundant Interfaces to Integrate Connectivity
  • Dual Ethernet, 1 COM, 1 CAN, 2 USB
  • 1 CompactFlash Card Type I/II Socket
  • 1 SATA (2.5″ HD option)
  • 2 Audio connectors (Mic/ Line-in & Line-out)
  • Ready-to-use
  • Windows XP embedded
VIA Eden V4 1GHz (128KB L2 cache inside)Low power CPU, fanless


System Memory
CF card slot x1SATA slot x1 (for 2.5″ HD)
10/100 Base-TX RJ-45 connector x2
Serial Port
RS-232/422/485 x1
Canbus x1 (DB9)
The CAN bus using the Philips SJA1000 controller,
electrically compatible with the PCA82C200
stand-alone CAN controller chip.
• Full CAN-functionality 2.0 B.• Extended receive buffer (64 byte FIFO).

• 16 MHz CAN Control frequency

Earphone/line-in and MIC-in 
USB 2.0 x2
System Control
Power on/off switch x1
Reset button x1
Power Supply
DC input 12~24V (2-pin terminal block or power jack)
Power Consumption
1.26A maximum (0.82A typical) with DC 19V input
LED per Ethernet port (on the port)
Link/Activity (Green on/Green blinking)Full Duplex/Collision (Yellow on/ Yellow blinking)
LED per unit
Power on/activity x1 (on/ blinking)HDD on/activity x1 (on/ blinking)
HW Watchdog Timer
Generates a time-out system reset; the time-out period can be programmed to be set from 1 to 255 seconds. 
Operating System
Verified OS
Windows 2000/XP, WinCE.NET, XP embedded, Linux 
OS supported by Korenix
XP embedded 
Rugged Aluminum Alloy Chassis
145(H) x 102(D) x 50(W) mm
Net weight
Operating Temp
5 ~ 158°F (-15 ~ 70°C), 5 to 95% RH
Storage Temp
-4 ~ 176°F (-20 ~ 80°C), 5 to 95% RH
FCC class B, CE
EN55022 class A, EN55024, EN61000-3-2, 3
EN61000-4-2, 3, 4, 5, 6, 8, 11
IEC60068-2-27 (50g peak acceleration)
IEC60068-2-6 (5g/ 10~150Hz/operating)
Greater than 76,493 hours @25oC
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.