JetI/O 6511 - Industrial Networking Solutions – Industrial Ethernet Switches and Routers

JetI/O 6511

 

JetI/O 6511 is an intelligent I/O server equipped with 8 Thermocouple Input channels, low voltage and wide range current Analog Input. JetI/O 6511 provides 16 bits resolution and high accuracy for temperature measurement. To make accurate measurements, the temperature can be compensated by cold junction compensation (CJC). JetI/O 6511 provides Windows Utilities, SNMP and Web configuration, industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existing HMI/SCADA. It also features robust aluminum case with good heat dispersing and IP31 protection. With JetI/O, users can easily perform status monitoring and control remote I/O devices.

JetIO 6511 Appearance

Dimensions (Unit -mm)


Intelligent 8-CH Thermocouple Input Ethernet I/O Server

  • Ethernet Block I/O with 8 Channel Thermocouple Input, low voltage and wide range current Analog Input
  • 16 bits resolution and high accuracy
  • Accurate measurements with cold junction compensation
  • High/Low Temperature/Current/voltage active alarm
  • Intelligent Condition&Go (IF-Then) logic rules
  • Flexible peer-to-peer I/O through one-to-one, one-to-many,
    many-to-one, and many-to-many communication
  • Unicast for network efficiency and true remote I/O
  • Free OPC server and Modbus/TCP support
  • Built-in watchdog timer and real-time clock
  • SNMP / Web for easy configuration and management
  • IP31 grade case protection
  • -25~70oC operating temperature for hazardous
    environmental application
System
CPU
100MHZ, RISC-Based
SDRAM
32K bytes
Flash ROM
512K bytes
EEPROM
256 bytes
Watchdog Timer
1.0 sec H/W
LED
PWR: Power Input plugged and On (Green)RDY: System startup ready (Red)
Network Interface
Ethernet
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Connector
1* RJ-45, Auto MDI/MDI-X
Protection
Built-in 1.5 KV magnetic isolation protection
LED

Upper (LAN Activity): Orange On & Blinking

Lower(10M/100M): 10M (Green Off) /100M(Green ON)

Thermocouple / Analog Input
Channels
8 Differential
Resolution
16 bits
Input Type
Thermocouple (T/C), mV, V, mA
Input Range
Voltage: ±2.5V,±1V, ±500mV, ±100mV, ±50mV, ±15mVCurrent: ±20mA with external 125Ohm resistor
Temperature Input Range
K/J/N/C/E/B/T/R/S type T/C

Type
Range
K -100°C ~ 1000°C
J -100°C ~ 900°C
N -270°C ~ 1300°C
C 10°C ~ 2310°C
E -240°C ~ 2310°C
B 0°C ~ 1800°C
T -270°C ~ 400°C
R -50°C ~ 1530°C
S -50°C ~ 1700°C
T/C Open Circuit Detection
Yes
Accuracy
±0.01% of FSR ±1LSB
Sampling Rate
10 samples/sec (total)
Input Impedance
10 M (ohm)
Calibration
On Board EEPROM
Isolation Voltage
2500Vrms
Feature
Network Protocols
IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server
Configuration
Windows Utility, Web, SNMP, DHCP Client, BootP for firmware update
Flexible peer-to-peer IO
one-to-one, one-to-many,
many-to-one, and many-to-many communication
Windows Utility
Block I/O Utility
OPC Server Utility
OPC Server for Modbus/TCP
SNMP
MIB-II: System, SNMP Trap and Private MIB
SNMP Trap Server
Up to 4 SNMP Trap Server
I/O Rules
High-/Low- Voltage/ Current alarms
Logic Condition&Go Rules
Conditions of the AI and temperature values, Actions include the trap
Power Requirements
System Power
external unregulated +24V (18-32V) 
Power Consumption
Max. 3.2W 
Mechanical
Dimensions
120 (H) x 55 (W) x 75 (D) mm 
Mounting
Din-Rail 
Material
Aluminum
Environmental
Regulatory Approvals
CE, FCC Class A
Operating Temperature
-25 ~ 70°C
Operating Humidity
0 ~ 95% non-condensing
Storage Temperature
-40 ~ 80°C
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.