JetNet 5710G - Industrial Networking Solutions – Industrial Ethernet Switches and Routers

JetNet 5710G


JetNet 5710G is a Gigabit Managed High Power PoE Switch, designed exclusively for highly critical PoE applications such as real time IP video surveillance with high resolution quality and the evolving demands of wireless communications such as Wimax and 802.11 a/b/g/n APs. By software configuration or by LLDP auto detection, the 8 PoE injector ports can deliver 15.4W by IEEE 802.3af or 30W by the latest High Power PoE IEEE 802.3at standard. The total power budget is up to 220W per unit to fulfill local increasing PoE demands. JetNet 5710G is designed in a robust metal enclosure and has -40~70°C wide operating temperature range to work reliably under vibrating and shock environments in rolling stock applications.

  • 2-port Gigabit Ethernet plus 8-port 10/100 TX withPoE-Plus
  • 8 PoE ports support 15.4W IEEE 802.3af and 30W high power IEEE802.3at PoE by LLDP PoE classification
  • 220W total power budget for High-power PTZ cameras
  • Proprietary Forced Powering for nonstandard PoE with safety control
  • MSR redundant surveillance network with 4+1GMultiRings
  • LLDP and optional JetView Pro i2NMS, auto-topology visualization management software for efficient surveillance network
  • QoS for prioritized video transmission
  • Optimized IGMP Query, snooping for one-to-many video transmission
  • Tag VLAN for video traffic isolation
  • LACP port trunking for bandwidth aggregation
  • Redundant DC Power Inputs and Alarm Relay Output
  • IP camera keep alive check and auto failure recovery
  • IP camera loss/failure alarm by e-mail and SNMP trap
  • Operating temperature -40~70°C (802.3af)


• Technology
Standard IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-T
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at LLDP Power over Ethernet plus
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol
• Performance
 Switch Technology Store and Forward Technology with 32Gbps Switch Fabric.
 System Throughput 14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
 CPU Performance 32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
 System Memory 8M bytes flash ROM, 64M bytes SDRAM
 Transfer packet size 64 bytes to 1522 bytes (includes double VLAN tag)
 MAC Address 8K MAC address table
 Packet Buffer 1M bits shared memory for packet buffer
 Transfer performance 14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet
 Relay Alarm Dry Relay output for port event or PoE event.
• System Management
 Configuration and monitoring interface Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm start, factory default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
 Telnet & Local Console Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
 SNMP v1, v2c, V3 with SNMP trap function, up to 4 trap stations and manual configuration of the trap server IP address
 SNMP MIB MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB
 Korenix Utility  Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
 Network Time Protocol Supports NTP protocol with daylight saving function and localize time sync function
 Management IP Security IP address security to prevent unauthorized access
 E-mail Warning 4 receipt E-mail accounts with mail server authentication
 System Log Supports both Local or remote Server with authentication
• Network Performance
 Port Configuration Port link Speed, Link mode, current status and enable/disable.
 Port Trunk IEEE 802.3ad port aggregation and static port trunk; trunk member up to 6 ports and maximum 4 trunk groups, including Gigabit Ethernet port.
 VLAN IEEE 802.1Q VLAN with GVRP. 256 VLAN groups, VLAN ID from 1 to 4094, Private VLAN
 Class of Service IEEE 802.1p class of service; per port 4 priority queues
 Traffic Prioratization Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
 IGMP Snooping IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also supports unknown multicasting process forwarding policies- drop, flooding and forward to router port
 Rate Control Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets
 Port Mirroring Online traffic monitoring on multiple selected ports
 Port Security Port security to assign authorized MAC to specific port
 DHCP DHCP Client, DHCP Server with IP & MAC Address binding and DHCP Relay (option 82)
 IEEE 802.1x Port based network access control and user authentication by radius account, password and key for the radius server authentication
• Power over Ethernet
 PoE Standard IEEE 802.3af Power over Ethernet , IEEE 802.3at Power over Ethernet plus
 PoE Architecture End-span wiring architecture
 PoE Operating Mode IEEE 802.3af /at Auto Mode: Automatically detects power consumption level by Classification ID and controls high power by IEEE 802.3at LLDP protocol (note-1).
Forced Mode: Forced PoE powering with Power limiting protection.
 PoE forwarding conductor RJ-45: V+ (3,6), V- (1,2)
 PoE Forwarding ability IEEE 802.3af: 15.4W x8 / 70°C
IEEE 802.3at: 30W x8 / 60°C
 Port Based budget control with  priority control System will auto calculate total power and shut down low priority port when drawing current is over the power supply
• Network Redundancy
 Multiple Super Ring (MSR) New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing, MultiRing and backward compatible with legacy Super Ring
 Rapid Dual Homing (RDH) Multiple uplink paths to one or multiple upper switch
 Trunk Ring Integrate port aggregate function in ring path to get higher throughput ring architecture
 MultiRing Couple or multiple up to 16 Rapid Super Rings
 Rapid Spanning Tree IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w. The RSTP function can be also deployed on the RSR ring port to deliver more redundancy
• Interface
 Enclosure Port 10/100 TX port: 8 -port RJ-45 with 4 PSE inject function
Gigabit port : 
2-port RJ-45
Console port : 
RJ-45 type RS-232 interface
Power & Alarm Relay port: 
6-pin removable terminal block connector and 1embedded alarm relay output
 Cables 100 Base-TX: 4-pair UTP/STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-T: 4-pair UTP/STP Cat.5e/Cat.6 cable, EIA/TIA-568B 100-ohm (100m)
 RS-232 & Alarm Output  RS-232: TxD (Pin 1), RxD (Pin2), Signal Ground (Pin5)
Alarm output: located on terminal block
 LED Indications  10/100 RJ-45: Link (Green on) / Activity (Green Blinking), Full duplex (Yellow on) / Collision (Yellow Blinking)
Gigabit Copper: Link (Green on) / Activity (Green Blinking)
PoE port: IEEE 802.3af (Green on: Power forwarding; Blinking: PoE Abnormal ) / IEEE 802.3at (Blue on: Power forwarding; Blinking:PoE Abnormal)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Red On)
Ring Status.: Green on (Ring normal) / Blinking (Wrong ring port), Amber on (Ring abnormal) / Blinking (device’s ring port failed)
 Power input interface 6-pin removable terminal block
 Alarm Output Dry Alarm Relay output integrated in 6-pin terminal block
Alarm Relay activated once pre-configured event occurred. ( 1A/ DC 30V)
• Power Requirements
 System Power Input Voltage: DC 48~57V, redundant input with reverse protection
 Power Consumption 15 watts @ DC48V without PD loading
• Mechanical
 Installation Wall Mount
 Case Steel Metal case
 Dimensions  185 (W) x 145 (H) x 63.8 (D) w/o mounting kit
296.5 (W) x 145 (H) x 63.8 (D) w/mounting kit
 Weight 1.25 kg
• Environmental
 Operating Temperature -40~70°C: 30W PD loading x8 ports
 Operating Humidity 0% ~ 95%, non-condensing
 Storage Temperature -40 ~ 85°C
 Hi-Pot AC 1.5KV for all ports and power
• Regulatory Approvals
 EMI CE/EN 61000-6-4, CISPR-16-1-2: 2003, CISPR-16-2-1: 2003, CISPR-16-2-3: 2006, CISPR-22: 2005+A1: 2005 (9.6), FCC Part15B Class A
 EMS CE/EN 61000-6-2: 2005, IEC 61000-4-2: 2008, IEC 61000-4-3: 2006+A1:2007, IEC 61000-4-4: 2004, IEC 61000-4-5: 2005, IEC 61000-4-6: 2008, IEC 61000-4-8: 1993+A1: 2000

Related Product

ethernet switch JetNet-4508v2
industrial ethernet switch jetnet3008f
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.