JetNet 6710G-M12 - Industrial Networking Solutions – Industrial Ethernet Switches and Routers

JetNet 6710G-M12

JetNet6710G-M12

 

JetNet 6710G-M12 HVDC is a Gigabit Managed Industrial Power over Ethernet Switch equipped with an isolated 110VDC power module and designed exclusively to fit in highly critical PoE applications on-board railways. By software configuration or by LLDP auto detection, the eight 10/100 TX PoE injector ports can deliver 15.4W by IEEE 802.3af or 30W by the latest High Power PoE IEEE 802.3at standard. The total power budget is up to 120W per unit to fulfill local increasing PoE demands. The two Gigabit Ethernet ports provide high speed uplink to connect with higher level backbone switches with Korenix MSRTM network redundancy technology. Korenix RSRTM can recover the network failure in less than 5 ms. To work under vibration and shock environments, the industrial M12 connectors provide exceptional solid Ethernet and PoE connections.

  • 2-port Gigabit Ethernet plus 8-port 10/100 TX withPoE-Plus
  • Rugged M12 D-coded connectors against vibration and shock
  • DC48V input, 15.4W IEEE802.3af PoE output for PoE IP cameras
  • DC55V input for 30W high power IEEE 802.3at PoE by LLDP PoE classification
  • 200W total power budget for High-power PTZ cameras
  • Proprietary Forced Powering for nonstandard PoE with safety control
  • PoE scheduling management
  • QoS for prioritized video transmission
  • Optimized IGMP Query, snooping for one-to-many video transmission
  • Tag VLAN for video traffic isolation
  • LACP port trunking for bandwidth aggregation
  • LLDP and optional i2NMS JetView Pro, auto-topology visualization management software for efficient surveillance network
  • MSR guarantees network reliability, 5ms failure recovery
  • IP camera keep alive check and auto failure recovery
  • IP camera loss/failure alarm by e-mail and SNMP trap
  • EN50121-4 EMC vertification for railway installations
  • Operating temperature -40~60°C (802.3af)

JetNet6710G-M12_dimensions

• Technology
 Standard IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3ab 1000 Base-TX
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at High Power over Ethernet
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol
• System Performance
 Switch Technology Store and Forward Technology with 32Gbps Switch Fabric.
 System Throughput 14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet
 CPU Performance 32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based watch-dog timer.
 System Memory 8M bytes flash ROM, 64M bytes SDRAM
 Transfer packet size 64 bytes to 1632 bytes (includes 1522 bytes VLAN Tag)
 MAC Address 8K MAC address table
 Packet Buffer 1M bits shared memory for packet buffer
 Transfer performance 14,880pps for Ethernet and 148,800 for Fast Ethernet, 1488,100 for Gigabit Ethernet
 Environment Monitoring Embedded board-level thermal detector for system temperature monitoring
 Relay Alarm Dry Relay output with 2A /30V DC or 0.5A/125V AC ability
• System Management
 Configuration and monitoring  interface Telnet, local RS-232 console, Web- browser interface, SNMP, Trap and SMTP interface.
Cisco-Like CLI, Telnet, Web, TFTP/Web Update for firmware and configuration backup and restore, DHCP Client, warm reboot, reset to default, Admin password, Port Speed/Duplex Control, status, statistic, MAC address table display, static MAC, Aging time, SNMP v1, v2c, v3, Traps and RMON groups 1,2,3,9.
 Telnet & Local Console Supports command line interface with Cisco like commands and maximum 4 sessions; the telnet interface also supports SSH.
 SNMP v1, v2c, V3 with SNMP trap function, trap station up to 4 and can be manually configured the trap server IP address
 SNMP MIB MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB
 Korenix Utility Supports JetView and JetView Pro with IEEE 802.1AB Link Layer Discovery Protocol for device finding and link topology discovery
 Network Time Protocol Supports NTP protocol with daylight saving function and localize time sync function
 Management IP Security IP address security to prevent unauthorized access
 E-mail warning 4 receipt E-mail accounts with mail server authentication
 System Log Supports both Local or remote Server with authentication
• Network Performance
 Port Configuration Port link Speed, Link mode, current status and enable/disable.
 Port Trunk IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and maximum 5 trunk groups include Gigabit Ethernet port.
 VLAN IEEE 802.1Q VLAN with GVRP. 64 VLAN groups, VLAN ID from 1 to 4094.
Supports Trunk, Hybrid and Link access modes
 Class of Service IEEE 802.1p class of service; per port 4 priority queues
 Traffic Prioratization Supports 4 physical queues, weighted fair queuing (WRR) and Strict Priority scheme, which follows 802.1p COS tag and IPv4 ToS/ Diffserv information to prioritize the traffic of your industrial network.
 IGMP Snooping IGMP Snooping v1/v2c /v3 for multicast filtering and IGMP Query mode; also support unknown multicasting process forwarding policies- drop, flooding and forward to router port
 Rate Control Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets
 Port Mirroring Online traffic monitoring on multiple selected ports
 Port Security Port security to assign authorized MAC to specific port
 DHCP DHCP Client, DHCP Server with IP & MAC Address binding and DHCP agent (option 82)
 IEEE 802.1x Port based network access control
 Power over Ethernet IEEE 802.3af / IEEE 802.3at; End-span wiring architecture
 PoE Operating Mode Auto mode:Auto detects and powering by IEEE 802.3af behaviors and IEEE 802.3at LLDP protocol for high power.
Forced mode: User configured power consumption without detection, classification
 PoE forwarding conductor  M12 D-code: V+ (1,2), V- (3,4)
 PoE Forwarding ability IEEE 802.3af: 15.4w
IEEE 802.3at: 30w
 Power Budget Control Port Based budget control with priority control, system will auto calculate total power and shut down low priority port when drawing current is over the power supply
• Network Redundancy
 Multiple Super Ring (MSR) New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid Dual Homing, TrunkRing, MultiRing and backward compatible with legacy Super Ring
 Rapid Dual Homing (RDH) Multiple uplink paths to one or multiple upper switch
 Trunk Ring Integrate port aggregate function in ring path to get higher throughput ring architecture
 MultiRing Couple or multiple up to 16 Rapid Super Rings, JetNet 6710G-M12 supports up to 4 100M rings and 1 Gigabit ring in single switch
 Rapid Spanning Tree IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree and IEEE 802.1w
• Interface
 Enclosure Port 10/100 TX port
JetNet 6710G-M12: 8 x M12-D-Code 4-pin Female
10/100/1000 TX port
JetNet 6710G-M12: 2 x M12-A-Code 8-pin Female
Console port & Alarm Relay Output
M12 A-code Male for RS-232 and relay alarm output.
Power port: CTG-4F 4-pin Rugged IP-67 Connector
 Cables 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568B 100-ohm (100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
1000 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568B 100-ohm (100m)
 RS-232 & Alarm Output RS232: M12 A-code female 5-pin connector, TxD (Pin 1), RxD(Pin 2), Signal Ground (Pin 5)
Alarm Output :M12 A-code female 5-pin connector 3, 4
 LED Indicators 10/100 RJ-45: Link /Activity(Green), Full duplex/Collision (Yellow)
Gigabit Copper: Link/Activity(Green)
PoE port: IEEE 802.3af 15.4w (Green on: Power forwarding; Blinking: PoE Abnormal )
IEEE 802.3at High Power High Power (Blue on: Power forwarding; Blinking: PoE Abnormal)
Power: System Power ready (Green on)
Sys: System Ready (Green On)
Alm: Alarm Relay Active (Red On)
R.M.: Ring Master (Green on), Ring Failure occurred (Yellow on)
Sys: System Ready ( (Green on: system ready)
 Power input interface Redundant power input
 Digital Alarm Output Dry Alarm Relay output integrated within RS-232 ( pin 3 & 4).
Alarm Relay activate once pre-configured event occurred.
• Power Requirements
System Power Input Voltage: DC 48~57V, redundant input with reverse protection
• Mechanical
 Installation DIN-Rail mount or Wall Mount
 Case Steel Metal and aluminum case
 Dimensions JetNet 6710G-m12/ 6710G-RJ : 198 (W) x 145.2 (H) x 74 (D) w/o mounting kit
JetNet 6710G-m12/ 6710G-RJ : 230.6 (W) x 145.2 (H) x 74 (D) w/mounting kit
• Environmental
 Operating Temperature -40°C ~60°C: 15.4w x 8 ports
-40°C ~60°C:30w x 8 ports
 Operating Humidity 0% ~ 90%, non-condensing
 Storage Temperature -40°C~ 85°C
 Hi-Pot AC 1.5KV for all ports and power
• Regulatory Approvals
 EMC EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11.
EMS:
EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11.
Railway EMC: EN 50121-4 and EN 50121-1
 Vibration and Shock Compliance with IEC 61373 for Railway and Rolling stock.

Related Product

ethernet-switch-JetNet6059G
industrial ethernet switch jetnet2005f
Industrial Ethernet Switch - JetNet 5828G
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.