Network Interface
|
|
|
|
|
|
Auto MDI/MDI-X, 10/100M Auto-Negotiation |
|
|
IP, TCP, UDP, ICMP, DHCP, BootP, ARP/RARP, Telnet, SNMP, HTTP, SNTP, SMTP |
|
Serial Interface |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD |
|
|
|
|
|
Features |
|
Power: Startup(Red); Ready(Green)
Ethernet : 10M Link(Orange), 100M Link(Green)Serial: Green |
|
|
Windows Utility-JetPort Commander, HTTPS, SSH, Telnet,SNMP, DHCP Client, Device Password, Firmware Upgrade,
Save to Flash |
|
|
|
|
Software reload default, Hardware reset button |
|
|
|
|
16 IP addresses to prevent illegal users |
|
|
Devices’ status, session history |
|
|
RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap |
|
|
Automatic e-mail warning by pre-defined events |
|
|
Trap to Syslog server or local display |
|
|
Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected |
|
Windows Utility |
|
Device Discovery, Auto IP, Network Setting, Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards |
|
|
|
|
Port-Specific access right, Direct portaddressing- via SSH to any Serial Over IP port, Direct
Access via serial applications or IP application, VT320
support |
|
Group Configuration Wizard |
|
Group IP Wizard, Group firmware upgrade, Group Backup/Restore, VCOM and TCP Tunnel Setup Wizard |
|
Power Requirements |
|
|
|
1 KV Burst (EFT), EN61000-4-4
0.5 KV Surge, EN61000-4-5 |
|
Mechanical |
|
43.72 x 21.40 x 4.40 cm (1U/19”) |
|
Environmental |
|
|
|
5% to 95% (Non-condensing) |
|
|
|