JetPort 5801 - Industrial Networking Solutions – Industrial Ethernet Switches and Routers

JetPort 5801

 

The JetPort 5801 is a one port RS-232/422/485 to Wireless Serial Device Server. The Wireless LAN interface is 802.11b/g with up to 54Mbps speed, which can give you an easy way and high bandwidth connection to the hard-to-wire serial devices and thus solve your network cabling problem in the field. The 128 bit WEP protect your serial data transmission and WPA over the Wireless LAN and avoid the unauthorized access or hack.

The JetPort 5801 can be configured by the JetPort Commander, therefore users can manage the wired and wireless JetPort without installing additional software. The JetPort 5801 is equipped with two types of power input, terminal block or power jack. The JetPort 5801 can be wall mounted or din-rail mounted by the din-rail kit.

Dimensions (unit – mm)

1-port RS-232/422/485 Wireless Serial Device Server

  • One-port RS-232/422/485 to 802.11b/g (up to 54Mbps) Wireless network
  • Encrypted data transmission with 128-bit WEP and WPA
  • Fiberglass antenna for water, dust and UV resistance
  • External antenna expands the range of WLAN
  • Dual Power Inputs by 12~48VDC Terminal Block and Power Jack
  • JetPort Commander, Windows Utility for device discovery, Multiple Device Setting and Monitoring
  • Versatile Serial Application: Real COM, Virtual COM, Serial Tunnel, TCP Server, TCP Client, UDP
  • Embedded beeper for positioning
  • Supports Windows 7/2000/XP/2003/Vista

Network Interface

WLAN Standard
802.11b/g WLAN
Spread Spectrum Technology
DSSS(802.11b), OFDM(802.11g)
Tx Power
13-17dBm at maximum radiation direction
Rx Sensitivity
-71 dBm @ 54 Mbps, -84 dBm @ 11Mbps
Transmission Rate
54 Mbps (max.) with auto fallback
Transmission Distance Up to 100 meters (open area)
Antenna
Ethernet
Connector
Protection
Supports the antenna diversity function
1* 10/100BaseTX, Auto MDI/MDI-X
RJ-45
Built-in 1.5 KV magnetic isolation protection
Serial Communication
Number of Ports
1
Interface
RS-232, RS422, 2/4-wire RS485
Connectors
male DB9
Baud Rate
110 bps to 230.4K bps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, Space, Mark
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, GND, DCD
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
Serial Line Protection
15KV ESD
Long Distance Termination
2*pin 120ohm DIP switches
Features
Protocols
LED
IP, TCP, UDP, ICMP, DHCP, ARP/RARP,SNMP, HTTPS, SSH, SNTP, SMTP,
Power 1/Power 2: Startup(Red); Ready(Green) LAN : 10M Link(Orange), 100M Link(Green) WLAN: Good Link Quality(Green), Poor Link Quality (Orange) Serial: Transmitting data(Green), Receiving data(Orange)
Configuration
JetPort Commander, HTTPS, SSH
Serial Service
Real COM, Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP
WLAN Discover
5 AP list
WLAN Strength
5 Levels
WLAN Security
WEP 64-bit/128-bit data encryption WPA Personal mode (AES/TKIP)
Reset
Software reload default, Hardware reset button
Beeper
Embedded beeper for positioning
SNTP
For time management
Access IP Table
16 IP addresses to prevent illegal users
Monitor
Devices’ status, RCOM/VCOM status
E-Mail Alert
Automatic e-mail warm by pre-defined events
System Log
Trap to Syslog server or local display
System Events
Cold/Warm Start, Login Failed, IP and Password Changed, Access IP Blocked, Serial Port DCD/RI/DSR/CTS changed, Serial Port connected/disconnected
SNMP
RFC1213 MIB II, RFC1317 RS232_like and SNMP Trap
Windows Utility
JetPort Commander
Device Discovery, Auto IP, Network Setting(Wire and Wireless), Device and Serial Port Setting and monitoring, Notification setting, Firmware Upgrade, Configuration Backup and Restore, Group Configuration Wizards
Serial Service Mode
Real COM, Virtual COM, TCP Server, TCP Client, TCP Tunnel and UDP
Advanced Serial Setting
TCP Alive Check Timeout, Inactivity Idle Timeout, Performance mode, Delimiter, Force TX Timeout for Data Packing and Force TX interval time
Group Configuration Wizard
JetPort Commander: Group IP Wizard, Group firmware upgrade, Group Backup/Restore, RCOM,VCOM and TCP Tunnel Setup Wizard
Power Requirements
System Power
PWR1: 12~48VDC Terminal Block

PWR2: 12~48VDC Power Jack with Power Adapter

Power Line protection
1 KV Burst (EFT), EN61000-4-4

0.5 KV Surge, EN61000-4-5

Power Consumption
Maximum 4.8 Watts
Mechanical
Dimensions
96.1mm(W)x124mm(D)x29.6mm(H)
Regulatory Approvals
FCC Class A, CE Class A, RoHS
Environmental
Operating Temperature
-10 ~ 55OC
Operating Humidity
5% ~ 95% (Non-condensing)
Storage Temperature
-20 ~ 70OC
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.