Industrial POE Switch - Industrial Networking Solution
Home > Products > Westermo > Industrial Ethernet Switches > Industrial POE Switch – PSI-660G-24V

Industrial POE Switch – PSI-660G-24V

Industrial POE Switch PSI-660G-24V

Industrial Power Supply PSI-660G-24V- is designed to eliminate the need for separate installation of power cables to equipment. Power is provided to equipment over the UTP data cabling. The PSI -660 is a simple Industrial PoE switch capable of driving 4 connected devices as well as two Gbit uplink ports for the most bandwidth intensive applications.

The unit is designed for DIN rail mounting into industrial cabinets or vehicles allowing simple Ethernet connections to be established between PoE devices like cameras or access points. The unique booster technology allows the unit to deliver 48V to equipment even if the input voltage level is only 12 V or 24 V.

Designed to work in industrial environments with its IP 31 Aluminium housing and a wide temperature specification the PSI-660 is an ideal automation solution.

The PSI-660 is so easy to use, simply connect power to the screw terminals and plug in your RJ-45 cables. If you plan to use the fault contacts a DIP switch allows configuration whilst LEDs provide simple diagnostics if required.

• Technology
Standard IEEE802.3 10Base-T, IEEE 802.3u 100Base-T Fast Ethernet,
IEEE 802.3ab 1000Base-T, IEEE802.3x Flow Control and Back-pressure,
IEEE 802.3af Power Over Ethernet, IEEE 802.1p Class of Service
PoE Output voltage DC 48V
Switch technology Store and Forward Technology with 32 Gbit/s Switch Fabric
• Interface
Congfiguration 802.3af compliant PoE ports x 4
10/100/1000Base-TX x 2
Auto MDI/MDI-X, Auto Negotiation
Cables 10 Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100 m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100 m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100 m)
10 Base-T: 4-pair UTP/STP Cat 3,4,5, 100 ohm (100 m) for PoE
100 Base-Tx: 4-pair UTP/STP Cat.5, 100 ohm (100 m) for PoE
Diagnostic LED Power (Green) x1
Fault alarm (Red) x1
PoE (Green)x4Diagnostic LED on the port:
Link/Activity(Green on/Blinking) x4,
Full duplex/Collision (Yellow on/Blinking) x4,
Gigabit Cooper: Link/Act (Green on / Blinking) x2,
Gigabit Cooper: Speed (Yellow blinking) x2
Relay Alarm Dry Relay output with 1 A @ 24 V ability
PoE technology Alternative B
• Performance
Transfer rate 14.880 pps for 10M Ethernet, 148.800 pps for 100M Fast Ethernet, 1.488,100 pps for Gigabit Ethernet
Transfer packet size 64 bytes to 1522 bytes (with IEEE Tag)
MAC Address 8K
Packet buffer 1 Mbits
• Power requirements
Power 12 ~ 24 V  with reversed protection
Isolated power input
Power Consumption 25 Watt without PoE loading
80 Watt with full PoE loading
• Mechanical
Construction IP31 Rugged Aluminum Alloy Chassis
Mounting DIN-Rail mount
Dimensions 66 (W) x 149 (H) x 131.2 (D) mm
Weight 1.05 kg
• Environmental
Operating Temperature –13 ~ 140°F (–25 ~60°C), 5 to 95% RH
Storage Temperature –40 ~ 176°F (–40 ~ 80°C), 5 to 95% RH
• RegulatoryApprovals
EMI FCC class A, CE/EN55022 Class A
EMS EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27 (50 g peak accelerattion)
Vibration IEC60068-2-6 (5 g / 5 ~ 500 Hz / random operation)
Railway EN 55022 Class A

Related Product

managed industrial ethernet switch rfi-18-f8
managed-industrial-ethernet-switch-480px_viper-212
be_480px_TD-29
be_480px_DR-260
fibre converter ODW-730-F1_EX
unmanaged industrial ethernet switch SDW-550
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.