TD-29 - Industrial Networking Solutions – Industrial Ethernet Switches and Routers
Home > Products > Westermo > Modem > Leased Line - PSTN Modems > TD-29

TD-29

be_480px_TD-29


TD-29 is designed to satisfy industry’s demands on reliability and functionality in environments with high levels of interference TD-29 is intended for half duplex communications via a 2-wire dedicated line. Equipment with an RS-232 or RS-422/485 interface can be connected and communicate point-to-point or in a multidrop application. Data rates up to 19200 bit/s are possible over distances of up to 10 km (6.2 miles). The transmission distance and number of multidrop points are affected by the number of connected modems and line quality. A typical value is 10 units up to 10 km (6.2 miles) at a transfer rate of 9600 bit/s.

  • Data rate up to 19200 bit/s
  • Number of multidrop points, 10 (typical value at 9600 bit/s)
  • Transmission distance up to 10 km (6.2 miles)
  • Watchdog
  • Transient protection on the line side
  • AC/DC Supply
  • Tri-Galvanic isolation (interface/line/supply)

•Power
Operating Voltage TD-29 DC : 12 – 36 VDCTD-29 36 – 55 DC : 36 – 55 VDCTD-29 230 AC : 207 – 264 VAC
Rated current TD-29 DC : 167 mA @ 12 VDCTD-29 36 – 55 DC : 60 mA @ 36 VDCTD-29 230 AC : 12 mA
Rated frequency TD-29 DC : DCTD-29 36 – 55 DC : DCTD-29 230 AC : 48 – 62 Hz
Connection TD-29 DC : Detachabel 2-pos. screw terminalTD-29 36 – 55 DC : Detachabel 2-pos. screw terminalTD-29 230 AC : Detachabel 3-pos. screw terminal

 

Related Product

fibre optic router
industrial serial converter / repeater 480px_RD-48
be_480px_mr-260
be_480px_MRD-310
Managed Industrial Ethernet Switch Viper-408
be_480px_TD-36-485
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.