WLn-ABOARD - Industrial Networking Solutions – Industrial Ethernet Switches and Routers
Home > Products > Acksys > WLn-ABOARD

WLn-ABOARD

WLn-ABOARD_antenna

 

ACKSYS proposes a wide range of wireless equipments (WLAN) for industry and transportation fields relying on the WiFi IEEE 802.11 standards (2.4 & 5 GHz) and on the 900 MHz unlicensed radio band for long range and non-line-of-sight operation including: access points, bridges, bridges routers, repeaters, serial to wireless gateways, radio switches, packs for point to point communications.

These equipments make it possible to:

  • Build a wireless network
  • Connect RS232, RS422, RS485 serial equipments together without any wiring operation
  • Connect Ethernet networks together without any cable
  • Build a wireless bridge between a serial MODBUS network and MODBUS/TCP
  • Wirelessly connect Ethernet, MODBUS/TCP, PROFINET, Ethernet/IP, DNP3 equipments .
 Functions  2-port Ethernet, dual WiFi radio: Bridge, bridge router, access Point,
repeater (MESH) & virtual cable
 Format  IP66 aluminun enclosure, universal mounting
 Dimensions  L:160 x W:220 x H:35 mm
 Weight  1200g
 Number of serial channel  1
 MODBUS / PROFINET / Ethernet/IP support  MODBUS/TCP, PROFINET & Ethernet/IP wireless gateway
 Windows COM port redirection
 Serial Link  Insulated RS422, RS485
 Maximum speed  2 x 300 Mbps
 Connection type CAT-6A M12 connectors for Ethernet, 6-point M12 for power supply, 8-point M12 for serial, 4-point for I/O
 Connection cable  1 x M12 power supply cable and 1 x M12 Ethernet cable
 Ethernet link  2-port Gigabit 10/100/1000 auto-sensing, auto-MDI/MDIX
 Radio link  2 triband radios WiFi IEEE 802.11n a/b/g (MIMO 3T3R)
 Radio redudancy  Yes, Internally between the two radios or externally between two devices
 Frequency range  2.4 / 5 / 5.4 GHz
 High power RF card option  Yes, 400mW (Hx option)
 Radio Modem (AD HOC) mode  Yes, Bridge mode
 Rapid roaming  0 mS (dual radio) < 50 mS (single radio)
 Antennas connections  Up to 6 2.4/5GHz MIMO antenna (not shipped with the product)
 External antenna connector for long range communications  6 weather Proof female N-type connectors
 Nominal range with built-in antennas  300m, open field
 Security WPA-PSK, WPA2-PSK, WEP 64/128 bits, IEEE 802.1X (RADIUS)
MAC addresses filtering SSID broadcast control
 Number of WiFi clients in AP mode  100
 Administration  Web browser SNMP, ACKSYS NDM, serial port, Telnet/SSH, CLI
 Default signaling Relay output warning: power failure, LAN or WLAN connection failure, watchdog
 Data plug for easy configuration save & restore (C-KEY)  Yes, optional
 Digital inputs  1 insulated digital input
 Power supply  Built-in redundant DC +9VDC to +72VDC
 Power consumption  16W typical (one radio) 21W typical (two radios)
 Power over Ethernet
PoE (IEEE 802.3at)
 Yes
 Environnement UTAC E2 certified Shocks & vibrations MIL-STD-810F
Qualified for on-road, railways transportation (EN50155 / EN 50121)
Operating temperature from -25°C to +70°C or extended -40°C to +75°C (-55°C cold start with optional PTC heater)
 Temperature monitoring  Yes
 LED Signalling  Yes
 RF level display  Yes,  for each radio in Bridge mode

Related Product

WLg-xroad-S internal
WLg-access-atex
WLg-LINK
wl-access-atex
Ethernet Air-Pack-V3
WLn-ABOARD_antenna
Water and wastewater | Road | Rail trackside | On board rail | Oil and Gas | Maritime and offshore | Factory automation | Energy | Building automation
Copyright © Gigantika All Rights Reserved.