JetI/O 6550

JetI/O 6550 is an intelligent I/O server equipped with 14 Digital Input, 8 Digital Output channels. JetI/O 6550 provides digital input and event counter for input mode, digital output and pulse output for output mode. The flexible Condition-&-Go (IF-Then) rules can help users to define intelligent logic rules for remote I/O control. JetI/O 6550 provides Windows Utilities, SNMP and Web configuration, industrial Modbus/TCP protocol and OPC Server driver for integrating JetI/O with existing HMI/SCADA. It also features robust aluminum case with good heat dispersing and IP31 protection. With JetI/O users can easily perform status monitoring and control the remote I/O devices.

JetIO 6550 Appearance

Dimensions (Unit -mm)

Intelligent 14-CH DI and 8-CH DO Etherent I/O Server

14-Ch Digital Input with DI and Event Counter mode
8-Ch Digital Output with DO and Pulse Output mode
Intelligent Condition&Go (IF-Then) logic rules
Active events by logic rules or SNMP Trap
Flexible peer-to-peer I/O through one-to-one, one-to-many,
many-to-one, and many-to-many communication
Unicast for network efficiency and true remote I/O
Free OPC server and Modbus/TCP support
Built-in watchdog timer and real-time clock
SNMP / Web for easy configuration and management
IP31 grade case protection
-25~70^oC operating temperature for hazardous
environmental application

System

CPU

100MHZ, RISC-Based

SDRAM

32K bytes

Flash ROM

512K bytes

EEPROM

256 bytes

Watchdog Timer

1.0 sec H/W

LED

PWR: Power Input plugged and On (Green)RDY: System startup ready (Red)

Network Interface

Ethernet

IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX

Connector

1* RJ-45, Auto MDI/MDI-X

Protection

Built-in 1.5 KV magnetic isolation protection

LED

Upper (LAN Activity): Orange On & Blinking

Lower(10M/100M): 10M (Green Off) /100M(Green ON)

Digital Input

Input Channels

14 channels

Input Type

source type

Input Mode

D/I or event counting with input frequency of 100 Hz max

DC Input

30V max

Threshold Voltage

Responding Time to Host PC Request

<2ms

Isolation Voltage

2500Vrms

Digital Output

Output Channels

8 channels

Output Type

SSR output, sink type

Output Mode

Level or pulse output with programmable pulse width

Working Range

5-40VDC

Driving Capacity

250mA max

Responding Time to Host PC Request

<2ms

Output Initial State

Programmable

Isolation Voltage

2500Vrms

Feature

Network Protocols

IP, TCP, UDP, SNMP, HTTP, BOOTP, DHCP, Modbus/TCP, OPC Server

Configuration

Windows Utility, SNMP, Web, DHCP Client, BootP for firmware update

Flexible peer-to-peer IO

one-to-one, one-to-many,
many-to-one, and many-to-many communication

Windows Utility

Block I/O Utility

OPC Server Utility

OPC Server for Modbus/TCP

SNMP

MIB-II: System, SNMP Trap and Private MIB

SNMP Trap Server

Up to 4 SNMP Trap Server

Logic Condition&Go Rules

Conditions of the DI/Counter
values, Actions include DO/Pulse, Counter Reset and Trap

Logic Rules Remote mirror mode

Single host to host, Condition of DI and Action of DO

Power Requirements

System Power

external unregulated +24V (18-32V)

Power Consumption

Max. 1.92W

Mechanical

Dimensions

120 (H) x 55 (W) x 75 (D) mm

Mounting

Din-Rail

Material

Aluminum

Environmental

Regulatory Approvals

CE, FCC Class A

Operating Temperature

-25 ~ 70°C

Operating Humidity

0 ~ 95% non-condensing

Storage Temperature

-40 ~ 80°C

Produk

News & Info

JetI/O 6550