| Technology |
|
|
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power Over Ethernet
IEEE 802.1p Class of Service |
|
|
|
|
|
|
| Store and Forward Technology with 32Gbps Switch Fabric |
|
| Interface |
|
|
802.3af compliant PoE ports x 8
10/100/1000Base-TX x 2
Auto MDI/MDI-X, Auto Negotiation |
|
|
|
10 Base-T: 2-pair UTP/STP Cat. 3,4,5 cable (100m)
100 Base-Tx: 2-pair UTP/STP Cat. 5 cable (100m)
1000 Base-T: 4-pair UTP/STP Cat. 5 cable (100m)
10Base-T: 4-pair UTP/STP Cat 3,4,5, 100ohm (100m) for PoE
100Base-Tx: 4-pair UTP/STP Cat.5, 100ohm (100m) for PoE |
|
|
|
PoE (Green) x8
Fault alarm (Red) x1
Power on/ off (Green on/ off) x1 |
|
|
|
Link/ Activity (Green on/ blinking)
Gigabit copper: Link/Act (Green on/ Blinking)
Full duplex/ Collision (Yellow on/ Blinking)
Gigabit copper: Speed (Yellow Blinking) |
|
|
|
| Dry Relay output with 1A@24V ability |
|
|
|
|
| Performance |
|
|
| 14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet |
|
|
|
| 64 bytes to 1522 bytes (with untagged and tagged frames) |
|
|
|
|
|
|
|
| Power Requirements |
|
|
|
|
|
| 30W with PoE, 95W without PoE |
|
|
|
| Mechanical |
|
|
| Rugged Aluminum Alloy Chassis |
|
|
|
|
|
|
| 66(W) x 149(H) x 131.2(D) mm (with Din-rail clip) |
|
|
|
|
| Environmental |
|
|
| -13 ~ 158°F(-25 ~ 70°C), 5 to 95% RH |
|
|
|
| -40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH |
|
| Regulatory Approvals |
|
|
| FCC class A, CE/EN55022 Class A |
|
|
|
EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11 |
|
|
|
| IEC60068-2-27 (50g peak acceleration) |
|
|
|
| IEC60068-2-6 (5g/5~500Hz/random operation) |
|
|
|
| at least 200,000 hours @ 25°C |
|
