Industrial Ethernet Media Converter – MCW-211 Series
The MCW-211 is an Industrial unmanaged media converter designed for easy use in heavy duty industrial applications. The MCW-211 transparently converts between 10/100Base-TX and 100Base-FX. A number of standard fibre optic connection types are supported including LC, SC and ST. The unit supports 802.1Q long packets which allows all standard industrial Ethernet protocols to to be used.
The MCW-211 is designed for use in industrial applications and so has dual power inputs for 10 to 57 VDC operation. Total galvanic isolation between the power supply and TX port helps to avoid ground loop currents and hence provide ultra reliable connections. The IP 21 rating ensures that the unit can be installed in locations where condensed water may occur.
Only industrial grade components are used which gives the MCW-211 an MTBF of 540,000 hours and ensures a long service life. A wide operating temperature range of –25 to +70°C (–13 to +158°F) can be achieved with no moving parts. The MCW-211 has been tested both by Westermo and external test houses to meet many EMC, isolation, vibration and shock standards, all to the highest levels suitable for heavy industrial environments.
Easy to understand LED indicators provide simple diagnostics if network problems arise. The link fault forward function helps to transfer indication of media failure onto connected ports to ensure that the MCW-211 can be used in resilient network structures. Data rate and flow control can be locked by DIP switch which can eliminate problems with old legacy Ethernet equipment that is unable to support auto negotiation.
MCW-211
| • Product Description | |
| Status | Active |
| Article number | 3645-0050, MCW-211-MM-LC2 3645-0001, MCW-211-MM-SC2 3645-0010, MCW-211-MM-ST2 3645-0020, MCW-211-SM-SC15 3645-0030, MCW-211-SM-LC15 3645-0040, MCW-211-SM-LC40 |
| Ports | 1 x 10 Mbit/s or 100 Mbit/s, Ethernet TX 1 x 100 Mbit/s, Ethernet FX |
| Description | Industrial Ethernet Media Converter |
| • Approvals | |
| Marine | DNV Standard for Certification no. 2.4 Applicable only for 3645-0030, 3645-0040 , 3645-0050 (MCW-211-SM-LC15, MCW-211-SM-LC40, MCW-211-MM-LC2) |
| •Reliability prediction |
|
| Service life, operating | Operating, 10 years |
| • EMC (Electromagnetic Compatibility) | |
| EN 61000-6-2 | Immunity industrial environments |
| EN 61000-6-4 | Emission industrial environments |
| •EMC specifications |
|
| EN 61000-4-2, ESD | Enclosure contact, ± 4 kV Enclosure air, ± 8 kV |
| IEC 61000-4-3, RF field AM modulated | Enclosure, 10 V/m 80% AM (1 kHz), 80 – 2700 MHz |
| EN 61000-4-4, fast transients | Signal ports, ± 1 kV Power ports, ± 2 kV |
| EN 61000-4-5, surge | Signal ports balanced, ± 2 kV line to earth, ± 1 kV line to line Power ports, ± 2 kV line to earth, ± 2 kV line to line |
| EN 61000-4-6, conducted RF immunity | Signal ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz |
| EN 61000-4-29, voltage dips and interruption | DC power ports: 10 & 100 ms, interruption 10 ms, 30% reduction 10 ms, 60% reduction +20% above & –20% below rated voltage |
| EN 55022, radiated RF emission | Enclosure, class A |
| EN 55022, conducted emission | DC power ports, class A |
| •Safety | |
| EN 60950-1, dielectric strength | Signal port to other isolated ports, 1.5 kVrms 50 Hz 1 min |
| • Climatic | |
| Temperature, operating | –25 to +70°C (–13 to +158°F) |
| Temperature, storage | –40 to +70ºC (–40 to +158ºF) |
| Humidity, operating | 5 to 95% relative humidity |
| Humidity, storage | 5 to 95% relative humidity |
| • Enclosure | |
| Enclosure | UL 94, PC / ABS, flammability class V-1 |
| Dimensions (W x H x D) | 34 x 123 x 121 mm (1.33 x 4.84 x 4.76) |
| Weight | 0.25 kg |
| Degree of protection | IP 21 |
| Cooling | Convection |
| Mounting | Horizontal on 35 mm DIN-rail |
| •Mechanical | |
| IEC 60068-2-6, vibration | Operating: 7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz 15 g, 11 ms |
| • Interface specifications, power | |
| Rated voltage | 12 to 48 VDC |
| Operating voltage | 10 to 60 VDC |
| Rated current | 200 mA @ 12 VDC 100 mA @ 24 VDC 50 mA @ 48 VDC |
| Rated frequency | DC |
| Inrush current | 0.03 A²s @ 12 VDC |
| Startup current | 0.75 A peak |
| Polaritiy | Reverse polarity protected |
| Redundant power input | Yes |
| Isolation to | Ethernet TX Ethernet FX |
| Connection | Detachable screw terminal |
| Connector size | 0.2 – 2.5 mm2 (AWG 24-12) |
| Shielded cable | Not required |
| • Interface specifications, 10/100BaseTX | |
| Electrical specification | IEEE std 802.3. 2000 Edition |
| Data rate | 10 Mbit/s or 100 Mbit/s, manual or auto |
| Duplex | Full or half, manual or auto |
| Transmission range | 100 m / 327 ft |
| Isolation to | Power |
| Connection | RJ-45 |
| • Interface specifications, 10/100BaseFX | |
| Electrical specification | IEEE std 802.3. 2000 edition |
| Data rate | 100 Mbit/s |
| Duplex | Full or half |
| Connection | SC, ST or LC |
MCW-211 EX
| • Product Description | |
| Status | Active |
| Article number | 3645-5050, MCW-211EX-MM-LC2 3645-5001, MCW-211EX-MM-SC2 3645-5010, MCW-211EX-MM-ST2 3645-5020, MCW-211EX-SM-SC15 3645-5030, MCW-211EX-SM-LC15 3645-5040, MCW-211EX-SM-LC40 |
| Ports | 1 x 10 Mbit/s or 100 Mbit/s, Ethernet TX 1 x 100 Mbit/s, Ethernet FX |
| Description | Industrial Ethernet Media Converter |
| • Approvals | |
| Hazardous locations | ATEX, EN 60079-0 and EN 60079-15 |
| •Reliability prediction |
|
| Service life, operating | Operating, 10 years |
| • EMC (Electromagnetic Compatibility) | |
| EN 61000-6-2 | Immunity industrial environments |
| EN 61000-6-4 | Emission industrial environments |
| •EMC specifications |
|
| EN 61000-4-2, ESD | Enclosure contact, ± 4 kV Enclosure air, ± 8 kV |
| IEC 61000-4-3, RF field AM modulated | Enclosure, 10 V/m 80% AM (1 kHz), 80 – 2700 MHz |
| EN 61000-4-4, fast transients | Signal ports, ± 1 kV Power ports, ± 2 kV |
| EN 61000-4-5, surge | Signal ports balanced, ± 2 kV line to earth, ± 1 kV line to line Power ports, ± 2 kV line to earth, ± 2 kV line to line |
| EN 61000-4-6, conducted RF immunity | Signal ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz Power ports, 10 V 80% AM (1 kHz), 0.15 – 80 MHz |
| EN 61000-4-29, voltage dips and interruption | DC power ports: 10 & 100 ms, interruption 10 ms, 30% reduction 10 ms, 60% reduction +20% above & –20% below rated voltage |
| EN 55022, radiated RF emission | Enclosure, class A |
| EN 55022, conducted emission | DC power ports, class A |
| •Safety | |
| EN 60950-1, dielectric strength | Signal port to other isolated ports, 1.5 kVrms 50 Hz 1 min |
| • Climatic | |
| Temperature, operating | –25 to +70°C (–13 to +158°F) |
| Temperature, storage | –40 to +70ºC (–40 to +158ºF) |
| Maximum surface temperature | 135°C (temperature class T4) |
| Humidity, operating | 5 to 95% relative humidity |
| Humidity, storage | 5 to 95% relative humidity |
| • Enclosure | |
| Enclosure | Cabelec 6141 |
| Dimensions (W x H x D) | 34 x 123 x 121 mm (1.33 x 4.84 x 4.76) |
| Weight | 0.25 kg |
| Degree of protection | IP 21 |
| Cooling | Convection |
| Mounting | Horizontal on 35 mm DIN-rail |
| •Mechanical | |
| IEC 60068-2-6, vibration | Operating: 7.5 mm, 5 – 8 Hz 2 g, 8 – 500 Hz 15 g, 11 ms |
| • Interface specifications, power | |
| Rated voltage | 12 to 48 VDC |
| Operating voltage | 10 to 60 VDC |
| Rated current | 200 mA @ 12 VDC 100 mA @ 24 VDC 50 mA @ 48 VDC |
| Rated frequency | DC |
| Inrush current | 0.03 A²s @ 12 VDC |
| Startup current | 0.75 A peak |
| Polaritiy | Reverse polarity protected |
| Redundant power input | Yes |
| Isolation to | Ethernet TX Ethernet FX |
| Connection | Detachable screw terminal |
| Connector size | 0.2 – 2.5 mm2 (AWG 24-12) |
| Shielded cable | Not required |
| • Interface specifications, 10/100BaseTX | |
| Electrical specification | IEEE std 802.3. 2000 Edition |
| Data rate | 10 Mbit/s or 100 Mbit/s, manual or auto |
| Duplex | Full or half, manual or auto |
| Transmission range | 100 m / 327 ft |
| Isolation to | Power |
| Connection | RJ-45 |
| • Interface specifications, 10/100BaseFX | |
| Electrical specification | IEEE std 802.3. 2000 edition |
| Data rate | 100 Mbit/s |
| Duplex | Full or half |
| Connection | SC, ST or LC |
